|
KATHY
Anon
2013-Feb-9 1:38 pm
[Help Me] passphrase on di-524how can i get into my router setup page if i don't have internet connection due to not putting in a passphase when trying to setup WEP? |
|
|
PamelaTSDigital Chick join:2004-04-20 Dallas, TX |
The default password was "password" a hard reset should return it to default setting. |
|
|
to KATHY
Try using WPA or WPA2 if it's available? |
|
kathy99 join:2013-02-10 Newport Beach, CA |
to KATHY
PASSWORD did not help. Isn't the passphrase different than the password? |
|
|
to KATHY
Is the same. If your using WPA or WPA2 and input a simplistic password in the box. it should work if you type it on the device.
Be sure you are connecting to the SSID name and not a different SSID by accident.
You might temporarily disable any WiFi security as a test. Make sure you can connect then. After that test, turn on WiFi security and set for WPA and TPIK then input a simple password, like 123456, save and test to see if you can get our device connected using that pw. |
|
BimmerE38FN |
to KATHY
also try a wired LAN cable connection from a PC to the back of the router as well. |
|