 shdesignsPowered By Infinite Improbabilty DrivePremium
join:2000-12-01
Stone Mountain, GA | reply to Subaru
Re: A air tool I love! Which stapler did you get?
I have looked at some but they all used narrow staples.
I have a finish nailer; makes things alot easier especially when thigs are to delicate to pound on.
Yes, adjust the pressure to set the force if the gun does not have its own adjustment.
--
Scott Henion
Embedded Systems Consultant,
SHDesigns home - DIY Welder |
|
 Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | Picked up this one here on Thursday
»www.amazon.com/Surebonder-9600-H···_pr_pb_t
One thing I can't figure out is it has an air leak near the front.. I will have to look at the manual to see if it's a gasket issue.
Reason why I got this one is because the other gun I have I noticed (my fault for not checking in store) 5/8" staples which are too big for 1x8 wood so I picked this one up because I can use 1/4" 6 mm staples.
--
It's NOT Ni-kon It's NE-KON!
LG is NOT Lifes Good It's Lucky Goldstar!
|
|
shdesignsPowered By Infinite Improbabilty DrivePremium
join:2000-12-01
Stone Mountain, GA | Ok, I may pick one up.
BTW, T50 staples come in boxes 1,250 staples in strips of 100. |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | said by shdesigns:Ok, I may pick one up.
BTW, T50 staples come in boxes 1,250 staples in strips of 100.
Correct |
|
 DraimanLet me see those devil horns in the sky
join:2012-06-01
Kill Devil Hills, NC
 ·Verizon FiOS
| reply to shdesigns
said by shdesigns:Ok, I may pick one up.
BTW, T50 staples come in boxes 1,250 staples in strips of 100.
Or a box of 5,000 for those of us who need a LOT! 
--
IF YOU FIND ANY MISTAKES IN MY WORK...Please consider that they are there for a purpose. I try to please everyone and there is always someone looking for mistakes! |
|
