Theme

Welcome · log in · join	food

	All Forums		Hot Topics		Gallery

Forums → O Canada! → Canadian →

Bell Canada → Re: post your speedtest 50/10 service

uniqs
38

« [TV] Bell told me Netflix is coming to Fibe TV ... Really? • [Internet] Bell Connection Hub or 2 Wire and Airplay »

This is a sub-selection from post your speedtest 50/10 service

kibosh join:2010-12-16 Whitby, ON	kibosh to hybrid02 Member 2013-Feb-10 2:22 pm to hybrid02 Re: post your speedtest 50/10 service I have Fibe TV as well. Downstream line rate: 84640 kbps Upstream line rate: 15104 kbps Bearer0 Downstream payload rate: 0 kbps Bearer1 Downstream payload rate: 70192 kbps Bearer0 Upstream payload rate: 0 kbps Bearer1 Upstream payload rate: 11328 kbps Downstream attainable payload rate: 96628 kbps Downstream attainable line rate: 137632 kbps
	actions · 2013-Feb-10 2:22 pm ·

BigWater join:2002-11-20 Sherbrooke, QC	BigWater Member 2013-Feb-10 4:41 pm said by kibosh: I have Fibe TV as well. [att=1] Downstream line rate: 84640 kbps Upstream line rate: 15104 kbps Bearer0 Downstream payload rate: 0 kbps Bearer1 Downstream payload rate: 70192 kbps Bearer0 Upstream payload rate: 0 kbps Bearer1 Upstream payload rate: 11328 kbps Downstream attainable payload rate: 96628 kbps Downstream attainable line rate: 137632 kbps Start 3 simultaneous HD recording and run the test again?
	actions · 2013-Feb-10 4:41 pm ·
kibosh join:2010-12-16 Whitby, ON	kibosh Member 2013-Feb-10 5:16 pm Here is with all 3 HD streams on . . .
	actions · 2013-Feb-10 5:16 pm ·
Seb8517 (banned) join:2010-07-12	Seb8517 (banned) Member 2013-Feb-10 5:58 pm said by kibosh: Here is with all 3 HD streams on . . . wow
	actions · 2013-Feb-10 5:58 pm ·
getonline join:2012-06-13	getonline to kibosh Member 2013-Feb-12 11:36 pm to kibosh Hi kibosh, how do you get the line stats? I want to see my downstream line rate.
	actions · 2013-Feb-12 11:36 pm ·
kibosh join:2010-12-16 Whitby, ON	kibosh Member 2013-Feb-13 9:22 am Check this thread: »Fibe 25 upload speed decreased after install Instructions and the program needed are there.
	actions · 2013-Feb-13 9:22 am ·
xtlee join:2012-06-20	xtlee Member 2013-Feb-20 8:00 pm The telnet program won't work anymore unless you are running older firmware. Bell disabled the page that allowed the posting of the config to the modem. The port stays open if you update but if you factory reset the modem you will loose the ability to telnet. I found that you can stop your modem from being updated by using test@test in the internet section, but if you have IPTV, I'm not sure if this will effect the service.
	actions · 2013-Feb-20 8:00 pm ·
kibosh join:2010-12-16 Whitby, ON	kibosh Member 2013-Feb-20 8:07 pm I am running new firmware and am able to telnet into it.
	actions · 2013-Feb-20 8:07 pm ·

Forums → O Canada! → Canadian → Bell Canada	« [TV] Bell told me Netflix is coming to Fibe TV ... Really? • [Internet] Bell Connection Hub or 2 Wire and Airplay »
This is a sub-selection from post your speedtest 50/10 service