|
to tntpointer
Re: Confused on installing Moca bridge with Westell 9100emOnly suggestion I can make at this point is the following: •Make sure wireless is disabled on your PC. •Release the WAN DHCP lease on the primary. •Immediately turn off the primary. •Connect the secondary to the coax. •Let the secondary acquire a WAN DHCP lease. You should then be able to login to the secondary. •Make the config changes to the secondary •Before disabling the Broadband (coax) interface on the secondary, release the secondary's WAN DHCP lease. •Immediately disable the secondary's Broadband (coax) interface. •At this point you should be able to reconnect the primary router.
I can't test this, so you may have to experiment.
If this doesn't work, I'd suggest giving up on the Westell and picking up an Actiontec off Ebay. |