dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
9
share rss forum feed

mattybaby

join:2003-05-14
Phoenix, AZ
reply to jsmiddleton4

Re: [AZ] Cisco DPC3010 Firmware upated question....

To confirm, the following firmware is the latest for a DPC3010 in AZ?

Firmware Name: dpc3010-v302r12901-110516a-COX.bin
Firmware Build Time: May 16 2011 17:09:15

jsmiddleton4

join:2003-11-13
Glendale, AZ
And your point Matt?

I am aware of what the firmware installed on my modem is. And the others who have pointed out that despite there being an update for these modems they too are at the 2011 firmware.

There is a newer firmware available. Could be good reasons why it isn't being installed in AZ market. The only explanation we've gotten, there isn't one available, is obviously not the case.

So my question still stands, what's up with that?

Why no 2012 firmware for the AZ market?


dvd536
as Mr. Pink as they come
Premium
join:2001-04-27
Phoenix, AZ
kudos:4
said by jsmiddleton4:

And your point Matt?

I am aware of what the firmware installed on my modem is. And the others who have pointed out that despite there being an update for these modems they too are at the 2011 firmware.

There is a newer firmware available. Could be good reasons why it isn't being installed in AZ market. The only explanation we've gotten, there isn't one available, is obviously not the case.

So my question still stands, what's up with that?

Why no 2012 firmware for the AZ market?

there might be issues between the new firmware and the CMTS gear used in arizona. to be told we're current is wrong when we aren't.
--
Despises any post with strings.

VentShop

join:2009-08-21
Oklahoma City, OK
Even though Cox does operate a nationwide data service updates are often pushed based on the home area NOC operating procedures and can be affected even for different hardware versions. Version one of the hardware may have had a small design flaw where version three had a different flaw from the first and a different firmware was issued to each one so as to allow the hardware to still function. The firmware for version one is not compatible with the hardware for version three. The same thing is true with motherboards and many other devices.