PacratOld and CrankyPremium,MVM
|reply to ttiiggy |
Re: PVC Pipe lube?
The last thing you should be doing is contaminating the surfaces with any kind of oil/lubricant. The glue will act as a lubricant at final assembly. Dry fit everything, and use a magic marker to help realign mating sections and fixtures at final assembly. To make the dry fit a little easier, use some fine sand paper or "crocus cloth" to make sure there are no burrs on edges or "scrape" shavings on mating surfaces.
Keep your eye on the ball, your shoulder to the wheel, your nose to the grindstone, and your ear to the ground. Now, try to work in that position!!!