dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
15
share rss forum feed

gkloepfer
Premium
join:2012-07-21
Austin, TX
reply to timpatti

Re: Using westell 327 (DSL) for a TWC wireless router

Looking at the manual, you'd want to set the option to make Ethernet 1 the WAN port in the WAN configuration options (this will allow you to connect your cable modem to Ethernet 1, and connect your computers and stuff to the other Ethernet ports, or use wireless), set the WAN Ethernet Configuration to Protocol: Routed, and set the DHCP Client to Enable. That should make the router work just like a regular wireless router and disable DSL.

Also make sure that before you plug-in the router to the cable modem, configure the router first and make sure that you power cycle the cable modem.

I found a couple of links that essentially say the same thing about configuring this, but they were a little vague.

Whatever you do, don't enable PPPoE for the WAN interface when using the cable modem. That won't work.

It's actually nice that they have a router that allows re-use like this. I don't have one, but it sounded like an interesting idea so I looked it up.



AhhhPoop

@rr.com

Thanks to all for the efforts. But the my effort all goes to hell when the password written down 5 years ago does not get you in. The factory default of admin/password does not help. Off to Best Buy next week.

Tim