| [DSL] Cellpipe How Do I Update My Firmware Hello, I have the Cellpipe modem, with the 1.0.4.4R3 firmware.
So I have the reboot issue constantly.
How do I update my Cellpipe modems firmware to 1.0.4.4R8. As this version fixes the reboot issue.
My modem also acts as my router, so I enter my PPPoE credentials into the modem. My firmware does not seem to get updated for reason though. Am I missing a step? |
|
|
|
 Viral
join:2011-09-10
Windsor, ON | Bell doesn't update them anymore, you can contact TSI and request a modem swap to the new Sagemcom modem instead |
|
| This is what I did,the Sagemcom is doing the exact same thing, but its worse because when this modem reboots, it take a lot longer than the cellpipe did to connect back to the internet. |
|
 JCohenPremium
join:2010-10-19
Nepean, ON
kudos:3
 ·Start Communicat..
 ·TekSavvy Cable
 ·Bell Fibe
·Rogers Hi-Speed
| said by ijake:This is what I did,the Sagemcom is doing the exact same thing, but its worse because when this modem reboots, it take a lot longer than the cellpipe did to connect back to the internet.
Than don't reboot it, other than that their is no way to fix it. |
|
| Sorry, I should have been a bit clearer on that subject. I don't reboot my modem. The modem reboots for some unknown reason randomly throughout the day.
I had this exact same problem with the Cellpipe modem, which is why TSI sent me this sagemcom modem. |
|
 TSI MartinPremium
join:2006-02-23
Chatham, ON
kudos:23 | All lights go off when it reboots? What does the system log say before/after the power cycle? |
|
| reply to ijake
Reboots and location in the house Is the modem right at the entry point of the line for your home? I had the same problem until I moved it from a more remote location in the house to the connection right after the demarcation point in the house.
--
Everything Apple |
|
