dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
10
share rss forum feed


DKS
Damn Kidney Stones
Premium,ExMod 2002
join:2001-03-22
Owen Sound, ON
kudos:2
reply to LazMan

Re: Final Level(3) Installation

said by LazMan:

The copper cabling is brutal, to be honest... The wraps of black tape at the cable butt, patch cords ty-wrapped to the twisted-pair.

It'll work, but it's not very neat.

At least there is no duct tape...
--
Need-based health care not greed-based health care.


weaseled386

join:2008-04-13
Port Orange, FL
kudos:1
Reviews:
·Bright House
·AT&T U-Verse
said by DKS:

said by LazMan:

The copper cabling is brutal, to be honest... The wraps of black tape at the cable butt, patch cords ty-wrapped to the twisted-pair.

It'll work, but it's not very neat.

At least there is no duct tape...

LOL! BellSouth used to require us to wrap the ends of shielded cable with grey electrical tape. It should wrap around the conductors 2 times, and then up to the sheath 2 times. Cut cleanly vs "ripping." A non-sheilded cable didn't require tape.

Now we're allowed to use black, but it looks terrible. It was a cost saving measure, because the price of 1 roll of grey can buy 10 rolls of black!


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
said by weaseled386:

said by DKS:

said by LazMan:

The copper cabling is brutal, to be honest... The wraps of black tape at the cable butt, patch cords ty-wrapped to the twisted-pair.

It'll work, but it's not very neat.

At least there is no duct tape...

LOL! BellSouth used to require us to wrap the ends of shielded cable with grey electrical tape. It should wrap around the conductors 2 times, and then up to the sheath 2 times. Cut cleanly vs "ripping." A non-sheilded cable didn't require tape.

Now we're allowed to use black, but it looks terrible. It was a cost saving measure, because the price of 1 roll of grey can buy 10 rolls of black!

Was that with propper STP plugs and STP cable or UTP plugs with STP cable?

Because with an STP plug its easy to tell, thus I wouldn't see the reason for the tape.

And if STP cable with UTP plugs then why not do it right and get STP plugs.
--
»Death Star Petition


weaseled386

join:2008-04-13
Port Orange, FL
kudos:1
Reviews:
·Bright House
·AT&T U-Verse
Per TP-76300, Section K, 3.5.3:
"Exposed shields of shielded cable shall be protected with two half-lapped layers of electrical tape or heat shrinkable sleeve."


My comment was about breaking the sheath of larger STP cable. While we do sometimes run standard 4 pair CAT5/6 cable, our typical run is 25 to 100 pair. The DMX has AMP connectors on the system side. DS1's are installed in groups of 28, and DS3's are installed in 12's or 24's. All is shielded cable, and requires tape where we "butt" the cable for termination.

Although the DMX Metro can be used for ethernet I can only recall two or three customers who've requested it in 8-10 years we've been installing them. My last Level-3 install was 192 DS3's, but the typical customer (or multi tennant) install is:

FN-A: 56 DS1's
FN-B: 56 DS1's
FN-C: Vacant for OCxx drops
FN-D: 24 DS3's

I know that seems like a lot of DS1's, but they're still used for a TON of things. If a DISC*S accompanies it, it can eat up to 28. A Wescom T1 repeater is almost always included, and can eat another 28.