Bricked ZyXEL P-2812HNU-F3
My Zyxel P-2812HNU-F3 is bricked.
When i connect to serial it only loops this:
ROM VER: 1.0.5
Power light is on constantly
Wireless light is on constantly
Ethernet ports 3 and 4 seems to work but my computer doesnt get a IP.
WAN port also seem to work.
I've tried setting my network card manually with IP: 192.168.1.2 / 192.168.1.33
And gateway as 192.168.1.1
Network mask: 255.255.255.0
Anyone know how i can get this working again?
but a JTAG programmer and a USB to serial adapter and upload the firmware.
|reply to Bzzz |
Where is the JTAG connector?