What modem's can i use with FIBE - Bell Canada

docbill join:2006-10-24 Stoney Creek, ON Reviews: ·Bell Sympatico ·Velcom ·Bell Fibe ·Start Communicat.. ·voip.ms ·PortBridge Inter.. ·Cogeco Cable	reply to kovy Re: What modem's can i use with FIBE said by kovy: I didn't say reset it or factory reset... even when entering a bad password or user name it will still authenticate after a few minutes with the default ID. And for those few minutes you gain about 3-5mbps of speed, and then it goes back down to 35mbps. I have noticed that resetting effect. That didn't happen last February. But recently when switching to a new ISP, I noticed the modem kept resetting the login information until the new login was activated... Perhaps that was also changed in a firmware update. However, the technique still has promise, as it did not reset itself every time after a few minutes. The first few times it reset itself within 10 minutes or less. However, the forth time I configured the wrong login information it stayed until I did a reset on the modem a few hours later... Whether it would have eventually reset itself is an unanswered question. However, I suppose if you are only gaining 3-5 Mbps, it isn't really worth the effort. Someone else mentioned you are capped at 40 Mbps by the modem anyway. If true, that would be a good reason to look for another modem. said by kovy: Like I said, I've tried all of this... I have the Sagemcom myself. I didn't want to buy a new modem... but after the latest firmware, which partially broke port forwarding, I decided to buy my own modem. Interesting... said by kovy: Both links you posted are for the 2wire... No the first link was for the 2wire, the second was the comment someone added to my review where I was using the Sagemcom modem. There link for the 2wire information worked. At first I skipped the step about changing the username, and I had the problem of a huge speed drop. Then when I configured change the username so it couldn't connect, I no longer had a speed drop. A few months later, a firmware update caused a different problem. When examining that I found I no-longer had to reset the username to a bogus value. I don't know when Bell put in the code to cause it to revert to factory username. Perhaps it has always been there, and I lucked out and happen to hit one of the combinations where it didn't work. Or perhaps they added that later. For me, with my 25/10 service, I will just continue to do my PPPoE login with my Asus-RT16N router, and forget about trying to use the modem features. However, if you really can find a working modem for $60, I might pick one up to have a spare. That could have worked well this weekend, when I was trying to decide if I had a defective modem or if Bell messed up the line. Since I'm now using a reseller, if I guess wrong, I could have ended up paying for a service call that would have cost more than $60.
	to forum · permalink · 2013-04-08 00:17:37 ·

kovy join:2009-03-26 kudos:8 3 edits	reply to docbill said by docbill: said by kovy: There's no disabling the login in the modem. Again more false information. The modem will authenticate itself with the sagemcom default ID. Looks like you don't understand. You don't reset it to the default username. You set to a username or password that gives authentification error. As I said I have no idea if this would still work with the current firmware. Obviously neither do you, as you don't even realize it used to be needed to do. (I didn't discover this trick on my own, someone else shared it to me as a comment on my review.) Since you don't really know it all, lets just shut this discussion down now... This thread is aiding no one. Here are the exact instructions I followed last year: »scomputerservicesgta.com/sharing···/op3.php As shared to me, here: »check scomputerservicesgta.com I didn't say reset it or factory reset... even when entering a bad password or user name it will still authenticate after a few minutes with the default ID. And for those few minutes you gain about 3-5mbps of speed, and then it goes back down to 35mbps. Like I said, I've tried all of this... I have the Sagemcom myself. I didn't want to buy a new modem... but after the latest firmware, which partially broke port forwarding, I decided to buy my own modem. Both links you posted are for the 2wire... Sorry if you find my attitude shitty... I just got annoyed with the misinformation. Maybe I spend to much time on theses forum.
	to forum · permalink · 2013-04-07 22:56:45 ·
docbill join:2006-10-24 Stoney Creek, ON Reviews: ·Bell Sympatico ·Velcom ·Bell Fibe ·Start Communicat.. ·voip.ms ·PortBridge Inter.. ·Cogeco Cable 3 edits	reply to kovy said by kovy: There's no disabling the login in the modem. Again more false information. The modem will authenticate itself with the sagemcom default ID. Looks like you don't understand. You don't reset it to the default username. You set to a username or password that gives authentification error. As I said I have no idea if this would still work with the current firmware. Obviously neither do you, as you don't even realize it used to be needed to do. (I didn't discover this trick on my own, someone else shared it to me as a comment on my review.) Since you don't really know it all, lets just shut this discussion down now... This thread is aiding no one. Here are the exact instructions I followed last year: »scomputerservicesgta.com/sharing···/op3.php As shared to me, here: »check scomputerservicesgta.com
	to forum · permalink · 2013-04-07 22:14:56 ·
kovy join:2009-03-26 kudos:8	reply to docbill said by docbill: said by kovy: Still doesn't change the fact that you're giving false information. No it is perfectly valid information, and I don't appreciate you saying otherwise. Last January, PPPoE gave me half speed. About 12 Mbps. At that time deactivating the modem login allowed full speed. Later a firmware update fixed it, so I could get full speed without disabling the login. The problem is there is an unstated assumption of what "full speed" means. For me it is 25 Mbps. For you it is 50 Mbps. I can't say what it will be in the future. I would be curious to find out though if for the 50 Mbps if disabling the login on the modem is still a viable workaround. I wish I could test that for you. There's no disabling the login in the modem. Again more false information. The modem will authenticate itself with the sagemcom default ID. Don't need to test, I already know everything about it... hence why I got another modem.
	to forum · permalink · 2013-04-07 13:35:53 ·
docbill join:2006-10-24 Stoney Creek, ON 2 edits	reply to kovy Last February (2012), PPPoE gave me half speed. About 12 Mbps. At that time deactivating the modem login allowed full speed. Later a firmware update fixed it, so I could get full speed without disabling the login.
	to forum · permalink · 2013-04-07 13:29:15 ·
kovy join:2009-03-26 kudos:8	reply to docbill said by docbill: said by kovy: Don't know what you're talking about. I had the, the update to date firmware and it only gave me 35mbps speed. If you don't have info, I suggest to not talk about it. Seriously get up to date before you spread any info. I have 25/10 service. So I would have no way to measure what happens beyond that. I imagine most users still have 25/7 or 25/10, possibly with Fibe TV. As Bell introduces faster speeds, those using them will face new challenges. If you are buying your own modem, it may or may not work for those enhanced services. Just as even if your alternative brand modem works with Bell today, since there is no support from Bell, you have no way of knowing Bell will not change something that locks out your modem in the future. To me, using an alternative modem sounds like a big crap shoot. Still doesn't change the fact that you're giving false information. The only reason why I would use a Sagemcom is if I didn't have any other option. With a 60$ alternative modem, I think it's well worth it. I don't see how Bell could lock this up. Did Bell lock out any ADSL modem ?
	to forum · permalink · 2013-04-07 13:18:50 ·
docbill join:2006-10-24 Stoney Creek, ON Reviews: ·Bell Sympatico ·Velcom ·Bell Fibe ·Start Communicat.. ·voip.ms ·PortBridge Inter.. ·Cogeco Cable 1 edit	reply to kovy I have 25/10 service. So I would have no way to measure what happens beyond that. I imagine most users still have 25/7 or 25/10, possibly with Fibe TV. As Bell introduces faster speeds, those using them will face new challenges. If you are buying your own modem, it may or may not work for those enhanced services. Just as even if your alternative brand modem works with Bell today, since there is no support from Bell, you have no way of knowing Bell will not change something that locks out your modem in the future. To me, using an alternative modem sounds like a big crap shoot.
	to forum · permalink · 2013-04-07 13:04:23 ·
kovy join:2009-03-26 kudos:8	reply to rickyfk said by rickyfk: i am getting bell fibe 25/10 and want to know if i buy a modem from somewhere what one's will work with it ? Well the Cellpipe has a limit of around 40mbps... So I'm pretty sure it's been there for a while.
	to forum · permalink · 2013-04-07 12:29:15 ·
BliZZardX Premium join:2002-08-18 Toronto, ON Reviews: ·WIND Mobile ·Bell Sympatico	reply to kovy I'm not sure if the slow bridge issue was introduced with new firmware, but if somebody knows how to flash firmware on the Sagem's and wants to try an old version, this is the file that shipped on the modems last Spring: FAST2864_v76396.img.secure (8.9 MB)
	to forum · permalink · 2013-04-07 12:07:13 ·
shaded join:2010-10-02 Ottawa, ON Reviews: ·Start Communicat..	reply to docbill said by docbill: You don't need to replace the modem. Just configure your router with the PPPoE information, and it will login directly. Older versions of the modems firmware had the problem that they worked at half speed for pass through PPPoE, but that has long since been resolved. However, if you do run into problems, just replace the username in the modem with something bogus, so only your router is connected over PPPoE. ya that "works fine" if you're on a 25/10 or slower speed, but the modem won't do more than 33Mbit/sec in 'bridge' mode as mentioned. the modem is also pretty junky and dies with a lot of traffic.
	to forum · permalink · 2013-04-07 05:56:07 ·
kovy join:2009-03-26 kudos:8	reply to docbill said by docbill: You don't need to replace the modem. Just configure your router with the PPPoE information, and it will login directly. Older versions of the modems firmware had the problem that they worked at half speed for pass through PPPoE, but that has long since been resolved. However, if you do run into problems, just replace the username in the modem with something bogus, so only your router is connected over PPPoE. Don't know what you're talking about. I had the, the update to date firmware and it only gave me 35mbps speed. If you don't have info, I suggest to not talk about it. Seriously get up to date before you spread any info.
	to forum · permalink · 2013-04-07 05:53:56 ·
docbill join:2006-10-24 Stoney Creek, ON Reviews: ·Bell Sympatico ·Velcom ·Bell Fibe ·Start Communicat.. ·voip.ms ·PortBridge Inter.. ·Cogeco Cable 2 edits	reply to JCohen If you have 25/10 service: You don't need to replace the modem. Just configure your router with the PPPoE information, and it will login directly. Older versions of the modems firmware had the problem that they worked at half speed for pass through PPPoE, but that has long since been resolved.
	to forum · permalink · 2013-04-06 22:20:31 ·
JCohen Premium join:2010-10-19 Nepean, ON kudos:2 Reviews: ·Start Communicat.. ·TekSavvy Cable ·Bell Fibe ·Rogers Hi-Speed	reply to docbill said by docbill: Even if you own one, you can't use it. Some DSL providers, such as Velcom will either sell or rent you a modem. If you buy it and switch to another provider, you will be forced to buy or rent another. Bell Canada will not allow them to provide VSDL service without also providing the modem. It is in their contracts. So the only reason to buy one is if you want a standby modem in case your service provided modem failed. The main reason people replace the Samgemcom modems is because they are fairly locked down and have a bunch of quirks that intermediate to advanced users find quite annoying. -- Opinions expressed are my own, and may or may not reflect those of my employers or any other BCE company or division.
	to forum · permalink · 2013-04-06 21:20:23 ·
docbill join:2006-10-24 Stoney Creek, ON Reviews: ·Bell Sympatico ·Velcom ·Bell Fibe ·Start Communicat.. ·voip.ms ·PortBridge Inter.. ·Cogeco Cable	reply to rickyfk Even if you own one, you can't use it. Some DSL providers, such as Velcom will either sell or rent you a modem. If you buy it and switch to another provider, you will be forced to buy or rent another. Bell Canada will not allow them to provide VSDL service without also providing the modem. It is in their contracts. So the only reason to buy one is if you want a standby modem in case your service provided modem failed.
	to forum · permalink · 2013-04-06 20:45:19 ·
JCohen Premium join:2010-10-19 Nepean, ON kudos:2 Reviews: ·Start Communicat.. ·TekSavvy Cable ·Bell Fibe ·Rogers Hi-Speed	reply to HiVolt said by HiVolt: said by Guspaz: The ZyXel modem will not work on Bell stingers, unless I'm mistaken. It does not, I tested one, it didn't even sync. Good to know.
	to forum · permalink · 2013-04-02 15:10:13 ·
HiVolt Premium join:2000-12-28 Toronto, ON kudos:15 Reviews: ·TekSavvy Cable ·TekSavvy DSL	reply to Guspaz said by Guspaz: The ZyXel modem will not work on Bell stingers, unless I'm mistaken. It does not, I tested one, it didn't even sync. --
	to forum · permalink · 2013-04-02 13:15:54 ·
Guspaz Guspaz Premium,MVM join:2001-11-05 Montreal, QC kudos:19	reply to rickyfk The ZyXel modem will not work on Bell stingers, unless I'm mistaken. -- Developer: Tomato/MLPPP, Linux/MLPPP, etc »fixppp.org
	to forum · permalink · 2013-04-02 11:52:10 ·
JCohen Premium join:2010-10-19 Nepean, ON kudos:2 Reviews: ·Start Communicat.. ·TekSavvy Cable ·Bell Fibe ·Rogers Hi-Speed	reply to kovy said by kovy: I think it depends on what SLAM you'll be connected to. From what I remember when people started to use them, they worked with both the Stingers and the 7330's.
	to forum · permalink · 2013-04-01 16:07:09 ·
kovy join:2009-03-26 kudos:8	reply to rickyfk I think it depends on what SLAM you'll be connected to.
	to forum · permalink · 2013-04-01 16:00:28 ·
JCohen Premium join:2010-10-19 Nepean, ON kudos:2	reply to rickyfk The ZyXel VSG 1432 will work with Bell Fibe, however the Sagemcom that Bell provides works just fine for the service.
	to forum · permalink · 2013-04-01 15:41:43 ·

O Canada! > Canadian > Bell Canada > What modem's can i use with FIBE

Re: What modem's can i use with FIBE