dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
39

Mike2012
@qwest.net

Mike2012 to NormanS

Anon

to NormanS

Re: changed to netgear d6200 and will not connect

The other problem is how to hard wire the 2 units i seehow to set up the bridge in the Actiontec but the hard wire is a mystery to me.

NormanS
I gave her time to steal my mind away
MVM
join:2001-02-14
San Jose, CA
TP-Link TD-8616
Asus RT-AC66U B1
Netgear FR114P

NormanS

MVM

Check your Actiontec for something like the Pace 4111N "LAN as WAN" setting:

LAN as WAN

Mike2012
@qwest.net

Mike2012

Anon

Thanks will check on that and get back

billaustin
they call me Mr. Bill
MVM
join:2001-10-13
North Las Vegas, NV

billaustin to Mike2012

MVM

to Mike2012
said by Mike2012 :

The other problem is how to hard wire the 2 units i seehow to set up the bridge in the Actiontec but the hard wire is a mystery to me.

You use an ethernet cable and connect the LAN port on the Actiontec Modem to the WAN port on the Netgear router (after you complete the setup to put the modem in bridge mode).