This is an update to this thread where I was seeing 591 MHz being dropped/filtered: »
[Signals] Is this noise, channel drop or something else....
The tech just left after pulling two filters from my line at the
hub pedestal. (the green box outside the house).
Thought I would pass along a tidbit of info at least for San Jose. He said that when Comcast upgraded everybody they had to switch a lot of frequencies around which in turn caused issues like mine. After he removed the filters the line stats are like this now:
Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 603000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK
Security Enabled BPI+
Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 8 603000000 Hz 5.9 dBmV 41.6 dBmV 0 0
2 Locked QAM256 1 561000000 Hz 4.8 dBmV 41.3 dBmV 0 0
3 Locked QAM256 2 567000000 Hz 5.5 dBmV 41.4 dBmV 0 0
4 Locked QAM256 3 573000000 Hz 5.8 dBmV 41.4 dBmV 0 0
5 Locked QAM256 4 579000000 Hz 5.7 dBmV 41.4 dBmV 0 0
6 Locked QAM256 5 585000000 Hz 5.6 dBmV 41.8 dBmV 0 0
7 Locked QAM256 6 591000000 Hz 5.7 dBmV 41.5 dBmV 0 0
8 Locked QAM256 7 597000000 Hz 5.7 dBmV 41.7 dBmV 0 0
Total Correctables Total Uncorrectables
0 0
Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 5 5120 Ksym/sec 30600000 Hz 37.8 dBmV
2 Locked TDMA and ATDMA 4 2560 Ksym/sec 25300000 Hz 37.5 dBmV
3 Locked ATDMA 6 5120 Ksym/sec 37000000 Hz 38.5 dBmV
4 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
and speeds are now:
So if you have been upgraded I would check your signals even if you are not experiencing issues.
According to the tech they are very busy pulling filters and checking lines due to the speed upgrades at least in San Jose.
Dan
edit: fix filter location to "pedestal"
