dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
780

nohc
@getthewave.com

nohc

Anon

Take 4 vlans in a port and pass each vlan to its own port

I have a cisco 3560g switch. I want to plug a network wire in port 2 on the switch that has 4 separate vlans on it (50, 66, 88, 99) and I want to pass each vlan to its own port like this:
vlan50 to port 5
vlan66 to port 6
vlan88 to port 7
vlan99 to port 8

How is this done? Would i confige port 2 as a trunk and then config port 5 to vlan50 and config port 6 to vlan66? I am at a loss with this exactly and was just hoping for some help. Please let me know, thanks!

RyanG1
Premium Member
join:2002-02-10
San Antonio, TX

RyanG1

Premium Member

well first off this sounds like a homework questions....

theres only 2 modes for a switchport...an access port or a trunk port. You already stated your answer to your question.

Google is your friend =)

Ryan
HELLFIRE
MVM
join:2009-11-25

HELLFIRE to nohc

MVM

to nohc
said by RyanG1:

well first off this sounds like a homework questions....

Ya think?

Like RyanG1 says, if this is homework and you're stuck on a concept, we're more than happy to help.

Regards