|
to elito
Re: [OOL] bonded upstreamNewark area here. Manual reset and I have bonded upstream, on 32 MHz and 22.50 MHz, upstreams 1 and 4. |
|
dm145 join:2009-12-12 Clifton, NJ |
dm145
Member
2013-Jul-2 11:33 am
Two upstream here no reboot required |
|
|
to elito
Still only 1 upstream here. |
|
|
to elito
Just rebooted the cable modem. Two bonded up stream channels now. Denville Parsippany area. |
|
ieking Premium Member join:2006-11-18 New City, NY |
to elito
New City (Rockland County) got 2nd upstream channel after manual reboot this morning.
StatusStatusHW/FW VersionsEvent LogCM StateAdvanced RF Parameters
Downstream DCID Freq Power SNR Modulation Octets Correcteds Uncorrectables Downstream 1 2 609.00 MHz 5.75 dBmV 38.26 dB 256QAM 20681187 0 0 Downstream 2 1 603.00 MHz 6.01 dBmV 38.26 dB 256QAM 13135440 0 0 Downstream 3 3 615.00 MHz 5.74 dBmV 38.26 dB 256QAM 13157470 0 0 Downstream 4 4 621.00 MHz 6.01 dBmV 37.94 dB 256QAM 13195919 0 0 Downstream 5 5 627.00 MHz 6.28 dBmV 38.61 dB 256QAM 13037105 0 0 Downstream 6 6 633.00 MHz 6.45 dBmV 38.61 dB 256QAM 12913998 0 0 Downstream 7 7 639.00 MHz 6.62 dBmV 38.98 dB 256QAM 13005985 0 0 Downstream 8 8 645.00 MHz 6.73 dBmV 38.98 dB 256QAM 13226975 0 0 Reset FEC Counters
Upstream UCID Freq Power Channel Type Symbol Rate Modulation Upstream 1 3 32.00 MHz 43.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 4 2 22.50 MHz 43.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM
Status System Uptime: 0 d: 4 h: 16 m Computers Detected: staticCPE(1), dynamicCPE(1) CM Status: OPERATIONAL Time and Date: Tue 2013-07-02 11:07:07 |
|
cheeky join:2002-04-27 Stratford, CT |
to elito
I just checked my modem and I have 8 downstream and two upstream channels the upstream light on front of modem is now blue from previous green color. Speedtest just now showed 18 downstream and 4.97 upstream speed. Always nice to see updates!
Motorola SB6141 (white) Stratford, CT |
|
|
to elito
Two upstream here, needed a manual reboot |
|
|
Tursiops_GTechnoid MVM join:2002-02-06 Brooksville, FL ARRIS TM1602
|
to elito
Bonded US now available in Norwalk. (Had to do a power-down modem reset). Boost+, but Still no change in Upload speed... |
|
|
Timsim
Anon
2013-Jul-2 4:24 pm
I still have 1 upstream channel, but it's now using the 32mhz frequency as of today. |
|
|
i1100 to elito
Anon
2013-Jul-3 8:33 am
to elito
Just rebooted this morning, now three upstream, speeds still the same... |
|
dm145 join:2009-12-12 Clifton, NJ |
dm145
Member
2013-Jul-3 8:54 am
Location for the three up? |
|
max pl join:2009-03-22 Hyde Park, NY |
max pl
Member
2013-Jul-3 9:10 am
rebooted in Hyde Park, NY and now have two upstream |
|
|
to dm145
brookhaven, ny |
|
|
SHoTTa35
Anon
2013-Jul-3 10:00 am
Whoa, guess you are the first with 3. I rebooted this morning in Fairfield, CT and all bonded up 2 channels here (after seeing Stratford and Norwalk getting theirs, Stratford I think should be on the same headend so figured it's worth a shot). Guess it would make sence to bond more because with enough people pushing 5Mbps and 25Mbps, that could almost saturate a 50Mbps upstream (2 x 27Mbps channels = 54Mbps - a little buffer). 3 x 27 will give it a bit more room |
|
|
to elito
2 bonded channels here in medford,NY on long island.
22.5mhz and 32mhz channels for upstream. I am on the 15/5 package.
PS I also got the upstream speed increase also.
That 3rd upstream channel must be an area specific one because its not even a docsis 2 channel. |
|
bcronin Premium Member join:2004-03-27 Hyde Park, NY |
to max pl
Yep, ditto. -- bc |
|
Hassan join:2005-09-11 Valley Stream, NY |
to i1100
What sort of plan are you on? Normal, Boost, Boost+, or Ultra? |
|
|
i1100
Member
2013-Jul-3 4:02 pm
ultra |
|
dm145 join:2009-12-12 Clifton, NJ |
dm145
Member
2013-Jul-3 4:18 pm
|
|
RARPSL join:1999-12-08 Suffern, NY |
to majortom1029
said by majortom1029:2 bonded channels here in medford,NY on long island.
22.5mhz and 32mhz channels for upstream. I am on the 15/5 package.
PS I also got the upstream speed increase also.
That 3rd upstream channel must be an area specific one because its not even a docsis 2 channel. I am in Rockland County NY and feed from the Mahwah NJ head-end. My channels are U1=26 and U4=19 (I have not tried rebooting again to see if I now have a 3rd Upload Channel). It looks like the frequencies assigned also vary by area/head-end. I am Boost+ if that matters. |
|
Hassan join:2005-09-11 Valley Stream, NY |
Hassan
Member
2013-Jul-3 5:01 pm
It would make sense that people with Ultra would have 3 bonded upload channels. I don't think Normal, Boost, Boost+ will see those. Not like it matters really, as long as the upload speed increase is stable for all. |
|
|
said by Hassan:It would make sense that people with Ultra would have 3 bonded upload channels. I don't think Normal, Boost, Boost+ will see those. Not like it matters really, as long as the upload speed increase is stable for all. I know nothing about DOCSIS, but I would assume that's incorrect. Hence the reason why all tiers get 8 DS channels. All tiers would also get upstream channel bonding just because it's the nature of the beast. All tiers get all available US/DS channels because if something is stepping on the frequency it has the other frequencies to use. Edit: Our upload and download are just capped via a config file, but it should continue to use all channels that are available. |
|
|
to Hassan
said by Hassan:It would make sense that people with Ultra would have 3 bonded upload channels. I don't think Normal, Boost, Boost+ will see those. Not like it matters really, as long as the upload speed increase is stable for all. That 3rd channel looks like its only for that area. it is only a docsis 1 channel vs the other 2 which are docsis 2. |
|
chunk73 Premium Member join:2002-02-22 Trumbull, CT |
to elito
Confirming two bonded upstream channels in Fairfield CT. Manual reboot was required on my arris modem. Nice to see all green lights now! |
|
|
to majortom1029
Indeed, I looked at my cable box's diagnostics screens and 37 mHz is being used. |
|
actor90Never a dull moment Premium Member join:2003-07-21 Jackson, NJ |
to elito
No upstream bonding here in Jackson, NJ yet. Some areas are still being worked on I imagine. |
|
blohner join:2002-06-26 Lehigh Acres, FL |
Same in 10567 - still one channel after reboot... |
|
|
2 bonded upstream channels after reboot today on the Darien/Stamford border. Arris modem Boost + |
|
Tradewind Premium Member join:2005-11-08 Marlboro, NJ 1 edit |
to elito
Nothing yet in my little town. Then again we folks in Monmouth and Ocean counties are usually at or near the bottom of CV's roll out barrel. |
|
RickNY Premium Member join:2000-11-02 Bellport, NY |
to elito
No upstream bonding yet here on Brookhaven system on Long Island after a reboot of my Arris.. Still using only 22.50 MHz.
Rick |
|