dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
7
share rss forum feed


blarg

@start.ca
reply to Toastertech

Re: how many channels

so there was an unused splitter on the line i removed it and now the numbers look like this,

Status Code: Operational
Software Version: STAC.02.50
Software Model: a81a
Bootloader: 2.3.1

Cable Signal Details
Forward Path:
Channel Frequency Power SNR BER Modulation
1 507.0 MHz -4.1 dBmV 41.9 dB 0.000 % 256 QAM
2 525.0 MHz -3.5 dBmV 42.5 dB 0.000 % 256 QAM
3 531.0 MHz -3.1 dBmV 42.5 dB 0.000 % 256 QAM
4 537.0 MHz -3.2 dBmV 42.5 dB 0.000 % 256 QAM
5 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
6 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
7 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
8 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
Return Path:
Channel ID Frequency Power Modulation
3 25.3 MHz 46.0 dBmV 16 QAM
0 0.0 MHz 0.0 dBmV QPSK
0 0.0 MHz 0.0 dBmV QPSK
0 0.0 MHz 0.0 dBmV QPSK
Data Service Details
Provisioned Address: Yes
Provisioned Time: Yes
Provisioned Configuration: Yes
Registered: Yes
BPI: Disabled

The upstream still seems a bit high, other than running a single cable, there is one junction on the line in the house, and/or rebuilding all of the connectors, i dont think there is much else i could do, is that number still high enough to have it looked at or should that be ok?


blarg

@navcanada.ca
Also, im curious if anyone knows if the higher upload speeds are going to be available in the north bay area?

Sanek

join:2006-08-10
Kanata, ON
reply to blarg
said by blarg :

so there was an unused splitter on the line i removed it and now the numbers look like this,

Status Code: Operational
Software Version: STAC.02.50
Software Model: a81a
Bootloader: 2.3.1

Cable Signal Details
Forward Path:
Channel Frequency Power SNR BER Modulation
1 507.0 MHz -4.1 dBmV 41.9 dB 0.000 % 256 QAM
2 525.0 MHz -3.5 dBmV 42.5 dB 0.000 % 256 QAM
3 531.0 MHz -3.1 dBmV 42.5 dB 0.000 % 256 QAM
4 537.0 MHz -3.2 dBmV 42.5 dB 0.000 % 256 QAM
5 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
6 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
7 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
8 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
Return Path:
Channel ID Frequency Power Modulation
3 25.3 MHz 46.0 dBmV 16 QAM
0 0.0 MHz 0.0 dBmV QPSK
0 0.0 MHz 0.0 dBmV QPSK
0 0.0 MHz 0.0 dBmV QPSK
Data Service Details
Provisioned Address: Yes
Provisioned Time: Yes
Provisioned Configuration: Yes
Registered: Yes
BPI: Disabled

The upstream still seems a bit high, other than running a single cable, there is one junction on the line in the house, and/or rebuilding all of the connectors, i dont think there is much else i could do, is that number still high enough to have it looked at or should that be ok?

Well, its much better now - just keep an eye on it throughout the day. Could be that you just checked on it at a good time?

Try hooking the modem up directly to the cable before all the splitters - what kind of stats are you getting? If you're getting something much better than that then you probably should take another look at your splitters and cabling.