dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
33013

motorola870
join:2008-12-07
Arlington, TX

motorola870 to Matt7

Member

to Matt7

Re: [Internet] Why is Ultimate Going faster then 50mbps in Socal

said by Matt7:

said by motorola870:

hmm I don't think that is really over provisioning compared to what TWC uses in their markets that they have had a while before the insight buyout. A least I hope they are not only doing 22/2.1 for Turbo for the overprovisioning. Unless TWC is still treating the 30, 50, and 75 tiers as a premium service that may be why we are seeing speed increases finally as standard was 10/1 went to 15/1 and turbo was 15/2 and went to 20/2.

It's possible even tough on 08/01/13 I was seeing:



Today is the first time I have seen anything above 2.0.. I am ok with it =) Now if they can just improve the Insight CMH area to do 30/5, 50/5.

well I knew about the 35/5 tier TWC has had on business class for a long time as a matter of fact when Dallas got wideband on the business side they gave them the option of 35/5 or 50/5 so nothing changes for them except their 50/5 and 75/5 are getting a boost
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

PLEASE TELL EVERYONE YOU KNOW TO ENJOY THE NEW SPEEDS WE NEED MORE CONFIRMATION

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

PLEASE TELL EVERYONE YOU KNOW TO ENJOY THE NEW SPEEDS WE NEED MORE CONFIRMATION

»stage.results.speedtest. ··· 5552.png



SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

nice I see that

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

nice I see that

I am betting TWC knows something is coming regarding Uverse and they want to stay ahead I am suspicious because of the 6~Mbps upload along with upping the downstream cap to 35.4Mbps for extreme just enough to give a good 34Mbps down and 5.5Mbps up after overhead Also they now have extreme at 74.99 and ultimate at 104.99 which I am betting will come down once Uverse introduces their 75Mbps tier.

Also I think TWC is likely load testing the upload before they do large increases on the upstream

I am assuming they may be just over provisioning or could be upping the speeds slowly. But having a 10Mbps over provision for a 75Mbps tier doesn't seem likely.
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

hmmmm.....the modem reset again.....»www.speedtest.net/my-res ··· 78182089

Can Anyone confirm this speed upgrade?

WEST LOS ANGELES AREA NEAR SANTA MONICA!

can anyone confirm this speedtest video »www.speedtest.net/my-res ··· 78187075
»www.speedtest.net/my-res ··· 78184209

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

hmmmm.....the modem reset again.....»www.speedtest.net/my-res ··· 78182089

Can Anyone confirm this speed upgrade?

WEST LOS ANGELES AREA NEAR SANTA MONICA!

can anyone confirm this speedtest video »www.speedtest.net/my-res ··· 78187075
»www.speedtest.net/my-res ··· 78184209



the best I have gotten. I don't think TWC has released a 10Mbps or 15Mbps upload yet.
SanAntonioTx
Premium Member
join:2008-07-18
Miami

2 edits

SanAntonioTx

Premium Member

»youtu.be/R2aKvS_4oDI
IM FREAKING OUT MOTO
this is a new video at 2 in the morning.......why is it going to almost 75mbps?

Talked to Timewarner Cable.........They said they aren't aware of the speed increase.....Slow updates?

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

How in the heck are you getting 10 and 15Mbps upload TWC Socal doesn't even have QAM64 upstream channels yet that I am aware of and are not bonding yet? The most any upstream in Socal has right now is around 20Mbps and that is on the 5.120 k/sym 6.4MHz wide channels.

TWC in Dallas is bonding 4 upstreams at QAM16/QAM64 at 3.2MHz wide and we only got 5.91Mbps upload max





















seems consistent 10 speedtests off of the same server at 4:30 am is yielding 5.75Mbps upload heck yeah
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

everything is the same on the modem????

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

everything is the same on the modem????

YES! hardwired 10/100 ethernet card. connected to the modem.
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

i looked at the config and its still the same...

Status

Connection help
This page displays information on the status of the cable modem's HFC and IP network connectivity.

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File
Security Enabled BPI+

Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 8 663000000 Hz -3.8 dBmV 37.4 dB 33 0
2 Locked QAM256 1 705000000 Hz -4.9 dBmV 36.0 dB 75 0
3 Locked QAM256 2 699000000 Hz -4.3 dBmV 36.5 dB 72 0
4 Locked QAM256 3 693000000 Hz -3.8 dBmV 36.6 dB 70 0
5 Locked QAM256 4 687000000 Hz -4.6 dBmV 37.1 dB 68 0
6 Locked QAM256 5 681000000 Hz -4.2 dBmV 37.2 dB 65 0
7 Locked QAM256 6 675000000 Hz -3.9 dBmV 37.1 dB 65 0
8 Locked QAM256 7 669000000 Hz -3.8 dBmV 37.3 dB 52 0

Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 1 5120 Ksym/sec 30700000 Hz 41.9 dBmV
2 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
3 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
4 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV

Current System Time: Sat Aug 03 09:42:30 2013

added a splitter for a 2nd tv.....but other then that SAME connection

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

i looked at the config and its still the same...

Status

Connection help
This page displays information on the status of the cable modem's HFC and IP network connectivity.

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File
Security Enabled BPI+

Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 8 663000000 Hz -3.8 dBmV 37.4 dB 33 0
2 Locked QAM256 1 705000000 Hz -4.9 dBmV 36.0 dB 75 0
3 Locked QAM256 2 699000000 Hz -4.3 dBmV 36.5 dB 72 0
4 Locked QAM256 3 693000000 Hz -3.8 dBmV 36.6 dB 70 0
5 Locked QAM256 4 687000000 Hz -4.6 dBmV 37.1 dB 68 0
6 Locked QAM256 5 681000000 Hz -4.2 dBmV 37.2 dB 65 0
7 Locked QAM256 6 675000000 Hz -3.9 dBmV 37.1 dB 65 0
8 Locked QAM256 7 669000000 Hz -3.8 dBmV 37.3 dB 52 0

Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 1 5120 Ksym/sec 30700000 Hz 41.9 dBmV
2 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
3 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
4 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV

Current System Time: Sat Aug 03 09:42:30 2013

added a splitter for a 2nd tv.....but other then that SAME connection

do you know the config file profile?
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

No but its strange.....i can't access with master password that i found out LOL.....but Idk.....i talked to T3 they said they aren't even aware of a slight speed increase *jeeze they need to inform the Reps*

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

No but its strange.....i can't access with master password that i found out LOL.....but Idk.....i talked to T3 they said they aren't even aware of a slight speed increase *jeeze they need to inform the Reps*

I sent you an IM
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

Right
SanAntonioTx

2 edits

SanAntonioTx

Premium Member

Network Access Control = 1

DOCSIS 1.1 Upstream Service Flow Settings
CM flow ref = 1
QoS param set type = 7
service class name = 'us_hsd_res'
us bw sched strategy = 2
max tx rate, bps = 10590617
max burst, MAC bytes = 20480
max concat burst, byt = 20480
IP ToS overwrite = 0

DOCSIS 1.1 Downstream Service Flow Settings
CM flow ref = 5
QoS param set type = 7
service class name = 'ds_hsd_res'
max tx rate, bps = 68157440
max burst, MAC bytes = 20480
Global BPKM Enable = 1

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by SanAntonioTx:

Network Access Control = 1

DOCSIS 1.1 Upstream Service Flow Settings
CM flow ref = 1
QoS param set type = 7
service class name = 'us_hsd_res'
us bw sched strategy = 2
max tx rate, bps = 65093600
max burst, MAC bytes = 20480
max concat burst, byt = 20480
IP ToS overwrite = 0

DOCSIS 1.1 Downstream Service Flow Settings
CM flow ref = 5
QoS param set type = 7
service class name = 'ds_hsd_res'
max tx rate, bps = 59136000
max burst, MAC bytes = 20480
Global BPKM Enable = 1

why do I see problems here? You can't have an upstream of 65.09Mbps and the downstream is less than the upstream?
bghs
join:2006-08-19

1 edit

bghs to SanAntonioTx

Member

to SanAntonioTx

Re: [Internet] UPDATE TWC speed increase ALL Tiers and Divisions

Can't believe you guys got me out of bed just to test this, haha.

Before I unplugged my modem, I ran about 5+ tests and averaged about 20.66 Mbps down and 2.09 Mbps up.

Restarted the modem, ran the tests again and now I'm at 22.77 Mbps down and 2.29 Mbps up

How nice of TWC.

Im in SoCal testing @ 3:18 am PDT.



EDIT

Funny thing is this isn't even my highest ever. I'm looking at my test history (speedtest.com) and my highest was 22.85 back in Oct when I first signed up for service. That first week or two of service I was actually hitting 21 down on numerous tests. Of course, over time, it evened out at 20 down.

Hopefully, this increase will stick.

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by bghs:

Can't believe you guys got me out of bed just to test this, haha.

Before I unplugged my modem, I ran about 5+ tests and averaged about 20.66 Mbps down and 2.09 Mbps up.

Restarted the modem, ran the tests again and now I'm at 22.77 Mbps down and 2.29 Mbps up

How nice of TWC.

Im in SoCal testing @ 3:18 am PDT.


well it seems TWC gave Extreme, Ultimate 50 and Ultimate 75 customers more than that :P

I have about 34 Mbps down on tests and 5.8 Mbps up

You saw the 75Mbps tier got a nice 10Mbps jump on the downstream and it is looking like Ultimate 50 got a boost too. Now what did Kansas City get is the question hehe


CompUser
join:2001-11-07
Ada, OH

CompUser to SanAntonioTx

Member

to SanAntonioTx
This was before rebooting.


This is after rebooting.






motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by CompUser:

This was before rebooting.
[att=1]
This is after rebooting.
[att=2]
[att=3]
[att=4]

nice I wonder if these speeds took effect 8/1?

Anonymous_
Anonymous
Premium Member
join:2004-06-21
127.0.0.1

Anonymous_

Premium Member

only getting 51/5 4 downstream channels 1 upstream

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by Anonymous_:

only getting 51/5 4 downstream channels 1 upstream

said by Anonymous_:

only getting 51/5 4 downstream channels 1 upstream

did you reboot your modem? That was what I did last night when i was testing an old router to put the modem into bridge mode.
SanAntonioTx
Premium Member
join:2008-07-18
Miami

SanAntonioTx

Premium Member

REBOOT YOUR MODEM!!!!!!!!

Anonymous_
Anonymous
Premium Member
join:2004-06-21
127.0.0.1

Anonymous_ to motorola870

Premium Member

to motorola870
that worked had to do a remote reboot because I did not want to get upto the modem.

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by Anonymous_:

that worked had to do a remote reboot because I did not want to get upto the modem.



still can't get more that 34 down and 5.75 up I guess that is the cap after the overhead

Anonymous_
Anonymous
Premium Member
join:2004-06-21
127.0.0.1

Anonymous_

Premium Member

GIG-E (PCI-Express)

motorola870
join:2008-12-07
Arlington, TX

motorola870

Member

said by Anonymous_:

GIG-E (PCI-Express)

mine is using a 10/100 card in a compaq presario from 2010 :P

Not enough memory but I liked the presario brand so I got another one when the one I had crapped out oh and I was used to using them in High School so that was a plus

Anonymous_
Anonymous
Premium Member
join:2004-06-21
127.0.0.1

1 edit

Anonymous_

Premium Member

once you get passed 80-85mbps then 10/100 will be a bottle neck.

gig-e is good for about 850-900mbps