|
Guru
Member
2013-Aug-6 10:39 pm
[INTERNET] Cogeco 10meg UploadWhoever got their Upload increased, post up your results here! Here is mine: |
|
·Start.ca SmartRG SR505N Asus GT-AC2900
|
Here's mine from rogers not cogeco. |
|
|
Guru
Member
2013-Aug-7 10:06 pm
Thanks DF. I just wanted to see who else got the upgrade from the Cogeco side as their official launch date for 10mb upload is tomorrow.
So it's just me who got the early upgrade? |
|
|
said by Guru:Thanks DF. I just wanted to see who else got the upgrade from the Cogeco side as their official launch date for 10mb upload is tomorrow.
So it's just me who got the early upgrade? Nope. Others on the 60 Plan also got it. » Rolling out 10Mbps tomorrow? Supposedly |
|
|
Guru
Member
2013-Aug-7 11:11 pm
said by FiberToTheX:said by Guru:Thanks DF. I just wanted to see who else got the upgrade from the Cogeco side as their official launch date for 10mb upload is tomorrow.
So it's just me who got the early upgrade? Nope. Others on the 60 Plan also got it. » Rolling out 10Mbps tomorrow? Supposedly I am aware of that. Just meant to say for Start customers as I post it on Start forum. |
|
roccaStart.ca Premium Member join:2008-11-16 London, ON 1 edit
1 recommendation |
rocca
Premium Member
2013-Aug-7 11:13 pm
We have official details now. It's being rolled out in a phased in approach across the network over the next 6 weeks and will automatically apply to all the 20, 30 and 60Mbps tiers.
edit: There is no way for us to determine when any specific customer or area will be updated. |
|
JakeG join:2013-02-23 Chatham, ON |
JakeG
Member
2013-Aug-8 1:28 am
Do you know when Chatham may get the upgrade? |
|
roccaStart.ca Premium Member join:2008-11-16 London, ON |
rocca
Premium Member
2013-Aug-8 1:31 am
Sorry, there is no information or firm timeline when any specific customer/area will be updated other than the target completion date is mid-September. |
|
|
dillyhammerSTART me up Premium Member join:2010-01-09 Scarborough, ON |
Yeah but do you know when Chatham may get the upgrade? Mike (sorry, can't help m'self) |
|
|
to Guru
no sign of the upgrade yet in Brockville. Where are you located? |
|
|
rogersmogers
Anon
2013-Aug-8 10:33 am
Rather then everyone posting they didn't get the upgrade only post when you get the upgrade. |
|
|
to Guru
Nothing yet in Kingston east either. |
|
marka join:2010-03-10 Fergus, ON |
to Guru
|
|
marka |
to Guru
I just did my daily modem restart and check, and I've now been upgraded in Fergus! |
|
Gone Premium Member join:2011-01-24 Fort Erie, ON |
Gone to Guru
Premium Member
2013-Aug-19 7:56 pm
to Guru
|
|
|
Guru
Member
2013-Aug-19 8:00 pm
Nice nice...enjoy the upload speed. It sure gets the job done faster. |
|
|
to Gone
Powercycled modem and now have 10 meg in St. catharines. Woot! |
|
macboy6 join:2009-04-17 Georgetown, ON |
10 Mbps upload in Georgetown on Advanced package! |
|
|
to Guru
Seeing some more upload speed in Brockville, up from the 2Mb/s....still not up to 10 yet...no QOS running on my router, so not sure whats up....
|
|
(Software) pfSense Ubiquiti UniFi UAP-nanoHD
|
to Guru
Just did a power-cycle on the modem. Hope to see the upload increase to 10meg. |
|
|
to Guru
How many upstream channels will we see in use on the modem when its implemented? I am only seeing 1 on here on my DPC3000 |
|
Gone Premium Member join:2011-01-24 Fort Erie, ON |
Gone
Premium Member
2013-Aug-20 4:06 pm
said by sssscary:How many upstream channels will we see in use on the modem when its implemented? I am only seeing 1 on here on my DPC3000 I suspect at least three, though modulation may come into play as well. |
|
|
to sssscary
I'm only seeing 1 upstream channel on mine. |
|
Gone Premium Member join:2011-01-24 Fort Erie, ON |
Gone
Premium Member
2013-Aug-20 5:32 pm
That could be why you're only seeing 5. |
|
DaveB join:2006-12-05 Fort Erie, ON |
to Guru
Haven't quite managed to get over 10Mb, but so close. |
|
|
to Guru
Good to go in Kingston East! |
|
roccaStart.ca Premium Member join:2008-11-16 London, ON |
to HaRdLy007
Can you try a factory reset? (hold reset pin in 30 seconds) |
|
|
Just did a reset, same results |
|
roccaStart.ca Premium Member join:2008-11-16 London, ON |
rocca
Premium Member
2013-Aug-20 7:28 pm
Must not be complete in your area yet, the roll-out continues through mid-September. |
|
|
rogersmogers
Anon
2013-Aug-20 8:51 pm
Well I am in the Pembroke/Petawawa area and just did a reset on my modem and I have the new speeds problem is still only have 1 upload channel so it maxes out about 3.5mbit upload or 500K/sec give or take. But hey 30/3.5 is still ok for now. Kinda wish I had D3 service. Speedtest is off the EastLink Barrie server. Couldn't get a full speed reading from the Start server. Cable Signal Details Forward Path: Channel Frequency Power SNR BER Modulation 1 447.0 MHz 4.2 dBmV 41.3 dB 0.000 % 256 QAM 2 453.0 MHz 4.4 dBmV 41.3 dB 0.000 % 256 QAM 3 459.0 MHz 4.3 dBmV 41.1 dB 0.000 % 256 QAM 4 465.0 MHz 3.9 dBmV 40.5 dB 0.000 % 256 QAM 5 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 6 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 7 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 8 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None Return Path: Channel ID Frequency Power Modulation 1 32.0 MHz 37.5 dBmV 16 QAM 0 0.0 MHz 0.0 dBmV QPSK 0 0.0 MHz 0.0 dBmV QPSK 0 0.0 MHz 0.0 dBmV QPSK |
|