| Need a cable routing diagram ....... I think ! OK COX TULSA has gone to SDV. So I now have a tuning adapter to add to my electric consumption. I also have my telephone service and Internet thru COX. So I have a Cisco DPQ 3212 Cable Modem with VOIP. A Motorola MTR700 tuning adapter. A Netgear WNDR 3700 v4 Router. Then I have a Ceton 4 Tuner card in my PC running Windows 8 64bit Pro with the Media Center add on. They also gave me a GLF-1002B1 filter and a two way splitter. The diagram that came with the adapter shows nothing coming out of the RF out and it doesn't give me any diagram with the cable/telephone modem in the loop just "the cable out of the wall." That cable goes to the modem only. Please look at my handy dandy color coded guide that I attached that I cobbled together with MS Paint. Thanks in advance! Anthony |
|
| 
Not shown in your original pic but needed: one 1x2 coax splitter rated for at least 5-1000MHz (satellite splitters, aka 2 GHz splitters, that only go down to 40 MHz will NOT work). /M |
|
| Thanks. The tuning adapter is not allowing or is not completing its pairing for some reason.
Anthony. |
|
zed260Premium
join:2011-11-11
Cleveland, TN Reviews:
 ·Charter
| said by coxnet :Thanks. The tuning adapter is not allowing or is not completing its pairing for some reason.
Anthony.
sounds like a provisiong issue or signal issue
hook up the tuning adapater stright to the wall and take the spliter out of the loop and see if you see anything if so its the spliter if not your need a tech |
|
| reply to coxnet
in your ceton diagnostic tool (comes with drivers) , click devices , click go to infini TV Device Webpage> then click the tuning adapter tab that should show what stage your in, if it doesn't pair call cox |
|
