dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
908
share rss forum feed


motorola870

join:2008-12-07
Arlington, TX
kudos:4

30Mbps tier now 40Mbps?

I am testing out at 40Mbps with the 30/5 tier. Is something fixing to change my config file still shows 35/5.9






















Please tell me that I am not imagining things with it looks like the provisioning system is messed up in my area and over allocating bandwidth and causing artificial bottlenecks?

Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 1 771000000 Hz -4.4 dBmV 38.2 dB 7 0
2 Locked QAM256 2 777000000 Hz -4.8 dBmV 37.8 dB 7 0
3 Locked QAM256 3 783000000 Hz -5.4 dBmV 37.2 dB 0 0
4 Locked QAM256 4 789000000 Hz -5.8 dBmV 37.1 dB 0 0
5 Locked QAM256 5 795000000 Hz -6.4 dBmV 36.1 dB 68 0
6 Locked QAM256 6 801000000 Hz -6.3 dBmV 36.9 dB 0 0
7 Locked QAM256 7 807000000 Hz -7.0 dBmV 36.5 dB 18 0
8 Locked QAM256 8 813000000 Hz -7.2 dBmV 36.1 dB 0 0

Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked TDMA and ATDMA 11 2560 Ksym/sec 29500000 Hz 31.5 dBmV
2 Locked TDMA and ATDMA 9 2560 Ksym/sec 36500000 Hz 31.5 dBmV
3 Locked TDMA and ATDMA 10 2560 Ksym/sec 33000000 Hz 31.5 dBmV
4 Locked TDMA and ATDMA 12 2560 Ksym/sec 24500000 Hz 31.5 dBmV

I am hoping that line work is being done in my area or something as on upstream ID: 12 it just went back to ATDMA which means noise may have been on the line and TWC could have been working on it.

Sorry if these posts sound out of whack but I have seen the issue of the speedtest going over what it should and then it drops below what it should be like it is being throttled if it gets to high and does not go back to what it should be.


Jabbu
Premium
join:2002-03-06
30meg is "config'd" for 35481600...

Your modem having -6, but 31 transmit, sounds like a LEQ pad is bad... You should be around 40-45ish.


Reignonme

@myvzw.com
What is leq pad?


motorola870

join:2008-12-07
Arlington, TX
kudos:4
reply to Jabbu
I don't know what is going on but it seems that my modem is breaking the provisioning cap for 30/5 (35/5.9) and being throttled and this problem has been off and on since 30/5 and 50/5 were introduced in my area.


GNH
tolle causam
Premium
join:1999-12-20
Arlington, TX
Reviews:
·Time Warner Cable
·AT&T U-Verse
reply to motorola870
Click for full size
Modem Screen Capture
I've noticed fluctuations as well. Have had a rock solid connection since shortly after MSO going to 3.0. I thought it was the expiration of a promo, but I called yesterday and made sure they kept me on Extreme, but still seeing fluctuations. I can provide test results later, but does anyone see any immediate issues by looking at my screen capture? Thanks in advance.


Sam3

join:2012-12-20
Dallas, TX
reply to motorola870
Click for full size
Click for full size
Something is up, connection has been a bit jittery since yesterday. This is my modem with only a few minutes of uptime.


Jabbu
Premium
join:2002-03-06
Yours looks like the arris cmts 8ch bug....


Jabbu
Premium
join:2002-03-06
reply to motorola870
Passive gear on the plant to balance signal levels. It would bring his return to a better spec.