| reply to planiwa
Re: [DSL] SmartRG SR505N Modem
I would think a simple speedtest.net run would verify if the modem can support 10 megs upload
Alot of people (myself included) are also interested in whether the modem can support the same 10 megs upload when the modem is used in bridge mode (the sagemcom doesn't support full speed in bridge mode)
|
|
|
|
| i second that, while connected via IKNS remote, please post speedtest as well as
a screenshot as seen here
»[DSL] SmartRG Bridge Mode |
|
planiwa
join:2009-02-19
Toronto M5S
kudos:1 | reply to akmeikle
Could you please clarify exactly what you mean by "Sagemcom in bridge mode", so that I can replicate that result?
Interesting that there is so much interest in performance questions, and none (yet) in questions about design, UI, functionality, implementation, and quality. |
|
| said by planiwa:Could you please clarify exactly what you mean by "Sagemcom in bridge mode", so that I can replicate that result?
Interesting that there is so much interest in performance questions, and none (yet) in questions about design, UI, functionality, implementation, and quality.
Bridge mode is when you use your own router to handle the ppoe session rather than the sagemcom (or smartrg) modem.
People that switch sagemcom modems to bridge mode have noted a speed penalty and I was curious if the smartrg had this speed penalty or not.
Don't have a sagemcom so can't really tell ya how to put it into bridge mode.
Here's an article about putting the sagemcom in bridge mode
»How to put Sagemcom 2864 in bridge mode? |
|
planiwa
join:2009-02-19
Toronto M5S
kudos:1
2 edits | I didn't express myself clearly enough:
I wrote:
"Could you please clarify exactly what you mean by "Sagemcom in bridge mode", so that I can replicate that result?"
I should have written:
"Could you please clarify exactly what you mean by "Sagemcom in bridge mode", so that I can replicate YOUR result?"
Can you please show your own results: Sagemcom in "bridge mode" and not in "bridge mode"?
Then (after you specify the settings for each), I will do my best to accommodate your request.  )
===> Edit: Best I can tell, the difference is a myth.
But when I post IKNS stats, as planned, probably later tonight, for the SmartRG, we'll know. Especially if it syncs at 10.
===> Edit: It sanc at 10.  |
|
| can you post same stats for a stinger/ikns remote?
everything works on 7330... |
|
