O Canada! → Canadian → Start Communications > 10 MB upload in Pembroke/ Petawawa yet?

10 MB upload in Pembroke/ Petawawa yet?

Been enjoying my Start connection!
Just a quick question - I'm in Pembroke ON and I was wondering if they have rolled out 10MB upload yet?
I have restarted my modem and done speedtests connected directly and here's the kind of general results I am getting: 35ms Ping/20.93Down/3.79 Up.
Here is my modem stats:
Power Level Signal to Noise Ratio
Channel 0: 5.7 dBmV 36.4 dB
Channel 1: 5.9 dBmV 36.2 dB
Channel 2: 5.3 dBmV 36.0 dB
Channel 3: 6.2 dBmV 36.2 dB

Upstream Channels
Power Level
Channel 0: 38.8 dBmV
Channel 1: 0.0 dBmV
Channel 2: 0.0 dBmV
Channel 3: 0.0 dBmV

Please let me know if everything looks proper.
Is under 4mb the best I can expect?
--
"There are no dangerous weapons, only dangerous men." - Sgt. Zim.

Many areas still seem to be 1 channel only, I suspect as they resolve local issues they'll continue to add upstream channels to get the higher speeds.

No one in the Pem/Pet area has higher then 1 channel. I get 3.8ish too on upload.

Same in Pet with a DPC3000.

Downstream Channels Power Level Signal to Noise Ratio
Channel 0: -2.9 dBmV 36.0 dB
Channel 1: -2.5 dBmV 36.2 dB
Channel 2: -2.4 dBmV 36.2 dB
Channel 3: -2.5 dBmV 36.0 dB
 
Upstream Channels Power Level
Channel 0: 41.8 dBmV
Channel 1: 0.0 dBmV
Channel 2: 0.0 dBmV
Channel 3: 0.0 dBmV
 

Seems to make sense the single channel on upstream is the limiting factory on 10Mbps upload in some areas.

3.5~3.8Mbps x 3 will you 10~11Mbps upload. So they've upgraded the bandwidth per channel for your area but still haven't activate multiple channel bonding on the upstream.

MODEM TECHNICAL DETAILS STATUS PAGE

This page will auto-refresh periodically.

Status Code: Operational
Software Version: STAC.02.50
Software Model: a81a
Bootloader: 2.3.1

Cable Signal Details
Forward Path:
Channel Frequency Power SNR BER Modulation
1 465.0 MHz 3.5 dBmV 40.4 dB 0.000 % 256 QAM
2 447.0 MHz 4.0 dBmV 40.8 dB 0.000 % 256 QAM
3 453.0 MHz 4.2 dBmV 40.7 dB 0.000 % 256 QAM
4 459.0 MHz 3.8 dBmV 40.8 dB 0.000 % 256 QAM
5 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
6 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
7 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
8 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
Return Path:
Channel ID Frequency Power Modulation
3 25.3 MHz 37.5 dBmV 16 QAM
0 0.0 MHz 0.0 dBmV QPSK
0 0.0 MHz 0.0 dBmV QPSK
0 0.0 MHz 0.0 dBmV QPSK
Data Service Details
Provisioned Address: Yes
Provisioned Time: Yes
Provisioned Configuration: Yes
Registered: Yes
BPI: Disabled