 dwaneI recommend Start.ca join:2003-10-08 Pembroke, ON Reviews:
·Start Communicat..
·Cogeco Cable
·Bell Sympatico
| 10 MB upload in Pembroke/ Petawawa yet? Been enjoying my Start connection! Just a quick question - I'm in Pembroke ON and I was wondering if they have rolled out 10MB upload yet? I have restarted my modem and done speedtests connected directly and here's the kind of general results I am getting: 35ms Ping/20.93Down/3.79 Up. Here is my modem stats: Power Level Signal to Noise Ratio Channel 0: 5.7 dBmV 36.4 dB Channel 1: 5.9 dBmV 36.2 dB Channel 2: 5.3 dBmV 36.0 dB Channel 3: 6.2 dBmV 36.2 dB
Upstream Channels Power Level Channel 0: 38.8 dBmV Channel 1: 0.0 dBmV Channel 2: 0.0 dBmV Channel 3: 0.0 dBmV
Please let me know if everything looks proper. Is under 4mb the best I can expect? -- "There are no dangerous weapons, only dangerous men." - Sgt. Zim. |
|
 roccaStart.caPremium join:2008-11-16 London, ON kudos:17 | Many areas still seem to be 1 channel only, I suspect as they resolve local issues they'll continue to add upstream channels to get the higher speeds. |
|
 | reply to dwane
No one in the Pem/Pet area has higher then 1 channel. I get 3.8ish too on upload. |
|
 Reviews:
·Start Communicat..
| reply to dwane
Same in Pet with a DPC3000.
Downstream Channels Power Level Signal to Noise Ratio
Channel 0: -2.9 dBmV 36.0 dB
Channel 1: -2.5 dBmV 36.2 dB
Channel 2: -2.4 dBmV 36.2 dB
Channel 3: -2.5 dBmV 36.0 dB
Upstream Channels Power Level
Channel 0: 41.8 dBmV
Channel 1: 0.0 dBmV
Channel 2: 0.0 dBmV
Channel 3: 0.0 dBmV
|
|