DZS join:2007-09-09 York, PA |
DZS
Member
2014-Feb-3 11:07 am
[X1-X2] AnyRoom DVR not working (MoCA issue?)I just noticed today that the DVR in the second box installed with my X1 system is not working.
I try to play a recoded show in the master bedroom, it comes up with a DVR screen, and then goes back to the guide.
Looking into this, there should have been a MoCA filter installed in my home, this was not installed.
Could this be causing the issue? |
|
|
Lolcats
Anon
2014-Feb-3 11:15 am
Yes, filter is needed to get it working also, if you aren't setup for anyroomdvr service in the coding then it won't work. |
|
SeattleMattStreaming Tech Director Premium Member join:2001-12-28 Seattle, WA |
to DZS
GM- Do you have more than 1 HD box? |
|
DZS join:2007-09-09 York, PA |
DZS
Member
2014-Feb-3 12:04 pm
I have the main X1 box (HD DVR) and then a second "Client" box (HD DVR) |
|
SeattleMattStreaming Tech Director Premium Member join:2001-12-28 Seattle, WA |
On the HD box...
Hold down "Exit" for 5 seconds. Hit the down arrow twice, and then the #2.
Go down to the last line - MOCA Diagnostics - and let us know what it says. |
|
DZS join:2007-09-09 York, PA |
DZS
Member
2014-Feb-3 12:23 pm
It says "Enabled" and "Link Up" |
|
SeattleMattStreaming Tech Director Premium Member join:2001-12-28 Seattle, WA |
Click to the right - there should be a matrix grid - curious what the #'s show |
|
DZS join:2007-09-09 York, PA |
DZS
Member
2014-Feb-3 12:30 pm
|
|
SeattleMattStreaming Tech Director Premium Member join:2001-12-28 Seattle, WA |
#'s look really good. Hmmm....probably a silly question - if you haven't done this - reboot the DVR - then attempt it. |
|
DZS join:2007-09-09 York, PA |
DZS
Member
2014-Feb-3 12:58 pm
I have just tried this again, no luck. |
|
DZS |
to SeattleMatt
Just got a prompt to upgrade to X2, did this on both boxes. DVR is now magically working! |
|
|
can anybody give us a screen shot if the x2 upgrade prompt |
|
DZS join:2007-09-09 York, PA |
DZS
Member
2014-Feb-3 1:13 pm
I can't anymore, but it said something like this "You are using the current version of the guide. Go to settings and choose 'New' for an updated experience."
Or something along those lines. |
|