N7AS join:2010-05-29 Prescott Valley, AZ |
N7AS
Member
2014-Mar-1 4:51 pm
[Equipment] OBi202 Firmware Update 3.0.1 (4303)There has been talk on the OBiTalk forum that the firmware update 3.0.1 (4303) for the BOi202 has problems that is causing the device to not receive calls. Has anyone here updated their OBi202 to this version? |
|
cb14 join:2013-02-04 Miami Beach, FL |
cb14
Member
2014-Mar-1 5:23 pm
Not only am I not receiving any calls, I cannot even open a support ticket to Obihai because the icon which is supposed to deliver the security code does not work any more. This is BAD. |
|
RonR join:2003-10-10 Ash Flat, AR |
RonR
Member
2014-Mar-1 9:53 pm
Make the following change (Default is checked):
Voice Services -> SPx Service -> X_EnforceRequestUserID : (unchecked) |
|
MangoUse DMZ and you get a kick in the dick. Premium Member join:2008-12-25 www.toao.net |
Mango
Premium Member
2014-Mar-1 9:57 pm
That's interesting; is that meant to prevent calls from SIP scanners?
Is its behaviour defective? |
|
RonR join:2003-10-10 Ash Flat, AR
1 recommendation |
RonR
Member
2014-Mar-1 9:59 pm
said by Mango:That's interesting; is that meant to prevent calls from SIP scanners? Presumably said by Mango:Is its behaviour defective? Apparently |
|
cb14 join:2013-02-04 Miami Beach, FL |
to RonR
I will try this one. |
|
|
mozerdLight Will Pierce The Darkness MVM join:2004-04-23 Nepean, ON |
to N7AS
I updated this morning [March 2] to this version via the ObiTalk portal and I am receiving calls without issue so far -- 2 DID's via voip.ms |
|
2 recommendations |
to cb14
cb14, have you tried going back to the last firmware version? » www.obihai.com/firmware/ ··· -4269.fw |
|
graysonf MVM join:1999-07-16 Fort Lauderdale, FL |
Calls to my Callcentric DIDs stopped working when the firmware was recently updated to 3-0-1-4303 even though my IPKall DID which is forwarded to my Callcentric SIP URI still worked.
Downgrading the firmware back to 3-0-1-4269 solved the problem.
Thanks for the link to the firmware. |
|
|
No worries... even though I wasn't affected I downgraded as well. I'll sit tight till things shake out. |
|
1 edit |
to N7AS
OBi202 here registering with washington.voip.ms. All auto provisioning and updating is disabled. I do not use the OBiTalk portal.
Firmware 3.0.1 Build 4269 worked fine. Firmware 3.0.1 Build 4303 with Voice Services SPx Service SIP Credentials X_EnforceRequestUserID checked also works fine... and seems like a good idea IF your server supports it.
Balloon help states, "Enforce incoming INVITE request userid to match AuthUserName or ContactUserID". X_ContactUserID is blank by default. I hope the OBi does not accept an incoming invitation with a false AuthUserName AND a blank ContactUserID.
OE |
|