Home Improvement → [Carpentry] Re: How to fix particleboard?

Too many people to reply to here but I can't rotate the speaker because it's a tweeter so it's still going to be the same..

here is the speaker and how it looks.. I was going to take a picture of it but the battery on my phone was too low to take a picture.. not a lot of room to work with and more so at the top inner part of the speaker.

»www.musiciansfriend.com/ ··· -cabinet

*edit wow did not know a single speaker is 61 lbs feels lighter

If you are handy with a router and a flush cut it that's an easy fix. Cut a piece of wood that the outside size of the horn. Install the cutout inside the cabinet, rough cut with a jig saw, and use the flush bit to trim it out. Then use some 1/4 to 1/2 inch longer screws to secure it. I would make the replacement out of MDF.