|reply to alphageek911 |
[Carpentry] Re: How to fix particleboard?
I just have to look at the speaker again I assume with T-nuts you can hammer it down or use the screw to compress and bite into the wood?
I don't know if the wood is wide enough for those holes and the T-nuts
If you use a hammer it may do further damage. Use a screw and washer to compress it. Be careful if you use a drill.
I do not, have not, and will not work for AT&T/Comcast/Verizon/Charter or similar sized company.
|reply to Subaru |
said by Subaru:For your application I would probably use a c-clamp to compress it into the wood.
I assume with T-nuts you can hammer it down or use the screw to compress and bite into the wood?