dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
225
scj6771
join:2013-02-17
Binghamton, NY

scj6771

Member

Adaptec Controller Issue

Issue with Adaptec 5405 controller, Added new drive into slot 3 to expand array, (this drive is same model but bigger in size) followed these steps:

1. Right click on the drive to be added and select initialize.

2. Right click on the RAID controller and verify that the background consistency check is disabled.

3. Right click on the logical device to be changed.

4. Choose expand or change logical device.

5. Select the RAID level for the logical device, click next. In order to expand the capacity of an existing array, select the same RAID level.

6. Select the drive to add into the existing array and click next.

At first a second array was then added? I rebooted the server and that second array disappeared.

Now the array says degraded, "failed logical device segments" and "inconsistent controller"???

I have rinsed and repeated using the above instructions several times but get the same result.

There is a small firmware upgrade, I'm running 5-2-0 (16501) and could go to 5-2-0 (18948), but I'm not one to upgrade controller firmware’s unless it's absolutely a necessity.
aguen
Premium Member
join:2003-07-16
Grants Pass, OR

aguen

Premium Member

What raid level were you running before starting the upgrade? What was the raid volume size before starting?