dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
1190

MJ
@41.190.16.x

MJ

Anon

[HELP] CME cannot call out

Please I cannot make outgoing calls on my CME but can receive incoming calls. below is my config. please advise;

controller E1 0/1/1
framing NO-CRC4
pri-group timeslots 1-31

interface Serial0/1/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn overlap-receiving
isdn incoming-voice voice
isdn sending-complete
no cdp enable

voice-port 0/1/1:15
timeouts interdigit 5
timeouts call-disconnect 6
connection plar 2601

dial-peer voice 30 pots
description e1 trunk -- outgoing GSM Calls---
destination-pattern 60[78][01]T
port 0/1/1:15
!
dial-peer voice 33 pots
incoming called-number .
direct-inward-dial
forward-digits all

DaSneaky1D
what's up
MVM
join:2001-03-29
The Lou

DaSneaky1D

MVM

Has this ever worked?
ladino
join:2001-02-24
USA

ladino to MJ

Member

to MJ
Enable the following debugs

debug isdn q931
debug voice ccapi inout
 

Then make an outbound call. The debugs should show why outbound calls are failing

MJ
@41.190.16.x

MJ to DaSneaky1D

Anon

to DaSneaky1D
No it has never worked
MJ

MJ to ladino

Anon

to ladino
Thanks , will try this and get back to you
MJ

MJ

Anon

I have just tried the debug command. please see output below;

Mfamosing_CME#debug isdn q931
debug isdn q931 is ON.
Mfamosing_CME#
Aug 1 08:55:18.745: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x16 is
0x0 0x0, Calling num 2604
Aug 1 08:55:18.745: ISDN Se0/0/0:15 Q931: Sending SETUP callref = 0x0083 callI
D = 0x8004 switch = primary-qsig interface = User
Aug 1 08:55:18.745: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0083
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '2604'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '07034153530'
Plan:Unknown, Type:Unknown
Aug 1 08:55:18.863: ISDN Se0/0/0:15 Q931: RX RELEASE pd = 8 callref = 0x008
3
Aug 1 08:55:19.115: ISDN Se0/0/0:15 Q931: RX SETUP pd = 8 callref = 0x0085
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '2604'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '07034153530'
Plan:Unknown, Type:Unknown
Aug 1 08:57:44.451: ISDN Se0/0/0:15 Q931: RX RELEASE pd = 8 callref = 0x008
5
Aug 1 08:57:44.607: //811/B967BE02807A/CCAPI/cc_api_call_disconnected:
Cause Value=31, Interface=0x21E329E4, Call Id=811
Aug 1 08:57:44.607: //811/B967BE02807A/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=31, Retry Count=0)
Aug 1 08:57:44.607: //810/B967BE02807A/CCAPI/ccCallReleaseResources:
release reserved xcoding resource.
Aug 1 08:57:44.607: //811/B967BE02807A/CCAPI/ccCallSetAAA_Accounting:
Accounting=0, Call Id=811
Aug 1 08:57:44.607: //811/B967BE02807A/CCAPI/ccCallDisconnect:
Cause Value=31, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C
ause=31)
Aug 1 08:57:44.607: //811/B967BE02807A/CCAPI/ccCallDisconnect:
Cause Value=31, Call Entry(Responsed=TRUE, Cause Value=31)
Aug 1 08:57:44.607: //811/B967BE02807A/CCAPI/cc_api_get_transfer_info:
Transfer Number Is Null
Aug 1 08:57:44.607: //-1/xxxxxxxxxxxx/CCAPI/cc_build_csv_feature_vsa:

Aug 1 08:57:44.607: :Inside cc_build_feature_vsa
Aug 1 08:57:44.607: //-1/xxxxxxxxxxxx/CCAPI/cc_build_csv_feature_vsa:

Aug 1 08:57:44.607: feature call basic
Aug 1 08:57:44.607: //-1/xxxxxxxxxxxx/CCAPI/cc_build_csv_feature_vsa:

Aug 1 08:57:44.607: cc_build_feature_vsa attr is "TWC","08/01/2014 09:57:44.345
","2604","07034153530",0,15,B967BE02 189011E4 807AE12B 1365F9A9,32B,"","","",""
Aug 1 08:57:44.707: ISDN Se0/0/0:15 Q931: RX - RELEASE_COMP pd = 8 callref =
0x8085
Aug 1 08:57:44.707: //811/B967BE02807A/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x21E329E4, Tag=0x0, Call Id=811,
Call Entry(Disconnect Cause=31, Voice Class Cause Code=0, Retry Count=0)
Aug 1 08:57:44.707: //811/B967BE02807A/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Aug 1 08:57:44.707: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Aug 1 08:57:44.707: :cc_free_feature_vsa freeing 28FEBD88
Aug 1 08:57:44.707: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Aug 1 08:57:44.707: vsacount in free is 1
Aug 1 08:57:44.707: //810/B967BE02807A/CCAPI/ccCallDisconnect:
Cause Value=31, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C
ause=0)
Aug 1 08:57:44.707: //810/B967BE02807A/CCAPI/ccCallDisconnect:
Cause Value=31, Call Entry(Responsed=TRUE, Cause Value=31)
Aug 1 08:57:44.707: //810/B967BE02807A/CCAPI/cc_api_get_transfer_info:
Transfer Number Is Null
Mfamosing_CME#
Aug 1 08:57:58.553: //-1/xxxxxxxxxxxx/CCAPI/cc_build_csv_feature_vsa:

Aug 1 08:57:58.553: :Inside cc_build_feature_vsa
Aug 1 08:57:58.553: //-1/xxxxxxxxxxxx/CCAPI/cc_build_csv_feature_vsa:

Aug 1 08:57:58.553: feature call basic
Aug 1 08:57:58.553: //-1/xxxxxxxxxxxx/CCAPI/cc_build_csv_feature_vsa:

Aug 1 08:57:58.553: cc_build_feature_vsa attr is "TWC","08/01/2014 09:57:39.289
","2604","",0,14,B967BE02 189011E4 807AE12B 1365F9A9,32A,"","","",""
Aug 1 08:57:58.553: //810/B967BE02807A/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x282E5304, Tag=0x0, Call Id=810,
Call Entry(Disconnect Cause=31, Voice Class Cause Code=0, Retry Count=0)
Aug 1 08:57:58.553: //810/B967BE02807A/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Aug 1 08:57:58.553: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Aug 1 08:57:58.553: :cc_free_feature_vsa freeing 28FEBCA8
Aug 1 08:57:58.553: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Aug 1 08:57:58.553: vsacount in free is 0
Mfamosing_CME#
Mfamosing_CME#

DaSneaky1D
what's up
MVM
join:2001-03-29
The Lou

DaSneaky1D

MVM

Called Party Number i = 0x80, '07034153530'
 
Are you trying to make a collect call?

Is your telephony-services configured to dial a digit before accessing an outside line? Like, dial "9", then your phone number?
ladino
join:2001-02-24
USA

ladino to MJ

Member

to MJ
It seems the outbound call looped back into the router & got disconnected. I am assuming this due to the misconfigured 'dial-peer 33' or due to the fact that 07034153530 belongs the DID block of your E1 PRI. In any case make the following changes, and try the outbound call again.

dial-peer voice 33 pots
 no forward-digits all
 port 0/1/1:15