My incredibly messy and incompletely setup lab and network.
So here is my incredibly disorganized but functional lab. Not pictured are the Cisco 3845 and WAP 4402 I have yet to setup, an Edgerouter Lite, as well as a handful of small Cisco switches (3560-8 PoE and 3560C-G), IP phones, and an AP (yes, just one).
From Top to Bottom:
Dell SRX 210B
Cisco 3825 with Voice Image and PVDM2 modules
Cisco 2511 RJ Terminal Server
Dell R210 UTM Gateway
Supermicro ESXi Host
Foundry 24 Port Gigabit Switch
Cisco 2811 with Serial and CUE modules
Cisco 3750-Lan Base 24 Port with PoE (have the SFPs somewhere)
Cisco 2950G-48 EI
Nokia IP330 running Checkpoint/pfSense (at least before the HDD died)
Tippingpoint IPS/IDS system (can do 1.2Gbps of IPS traffic)
HP DL165G2 running ESXi/CUCP
HP DL360G4p running Cisco ACS
|reply to sk1939 |
cobwebs are the best feature
That switch has been sitting there a long time (year or two), although it only takes a few days in that basement to have a cobweb form.
DarkLogixTexan and ProudPremium
Well if you're so worried about the mess you could clean it a little by sending the 3750 to me hehe.--