Millenicom → MBR95?

When using wan/WiFi if I'm saying it right,hooked to 291 hotspot ,hotspot runs at say 20mbps going thru router if I'm lucky I get 5mbps and pings are 200+. Is there a setting that is not set right.

Found the answer on my own,live with it that's what happen's.

I have not messed with the mbr95 BUT when needing to re-route hotspots I have been grabbing cheap routers that can run tomato. I then put the tomato router in "wireless client mode", and have that connect to the hotspot, I then run the LAN ethernet from the tomato router to the WAN in on whatever router I am needing to feed the hotspot internet to.

Even with a $10 asus router I have had no issues hitting 20 meg down on several carriers lte hotspots. The mbr95 slowdown is most likely due to them using a single wifi radio and time slicing it, instead of having 2 independent on board wifi radios.