dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
3345

neill6705
join:2014-08-09

1 edit

neill6705

Member

My Home Network as of 11/28/14

Click for full size
Click for full size
Click for full size
Click for full size
Here is my home network. My router is a Cisco 1841 running IOS 15.1 - dated, I know, but it still gets the job done. The modem is a Centurylink C2000T operating in transparent bridge mode, which has been one of the best VDSL modems I have ever owned. My internet connection is 20/768k from Centurylink. The switch is a Dell Powerconnect 5324. It's a pretty generic 24 port managed gigabit switch, but once again, it gets the job done. The white box is a WD MyCloud 4TB NAS, which I use for streaming Blu Ray ripped movies. It isn't the most powerful thing ever, but it works well for this. The UPS is a CyberPower OR700. I have two power strips zip tied onto the side of the rack, one for surge and another for surge+battery. I have two APs, Ubiquiti Unifi AC1750 which is mounted under the stairs conveniently in the center of the house and an Engenius ENS200, which covers the back yard in the summer (it's currently in my desk since it's winter).

On the logical side, there are three VLANs, VLAN 1 for the LAN, VLAN 2 for IPTV traffic, and VLAN 3 which feeds a guest SSID on my APs. VLANs 1 and 3 connect directly to the internet and VLAN 2 is fed from a GRE tunnel (kind of like a VPN, but supports multicast traffic) which goes to a router at the telco co-op I work for. Normally, we deploy IPTV over our fiber network. Unfortunately, I'm out of our service area but still wanted to take advantage of the IPTV service we provide. This turned out to be a surprisingly elegant solution. It works really well.

sk1939
Premium Member
join:2010-10-23
Frederick, MD

sk1939

Premium Member

Surprised that IPTV works over GRE. Also surprising the company let you do that.
JJV
Premium Member
join:2001-04-25
Seattle, WA

JJV to neill6705

Premium Member

to neill6705
Thanks for sharing
I love looking at this stuff

Thane_Bitter
Inquire within
Premium Member
join:2005-01-20

Thane_Bitter to neill6705

Premium Member

to neill6705
Cool stuff.

Third rack unit from the top, the cable management device, how far out from the rack does it protrude?

neill6705
join:2014-08-09

neill6705 to sk1939

Member

to sk1939
I was surprised when I got it working as well. The only problem is that it's fed from a Cisco 7606 in our lab, so it sometimes goes down when people are testing. I'm working on a setting up an old 7604 that will be dedicated for the employees using the GRE tunnels to get TV.

As far as the company letting me do it, they're really cool about that stuff. They actually let employees who want to do it borrow 881s to get it up and running. I think there are eight or so of us getting TV this way.

It isn't something we would ever sell, so I don't work on it much during the day. It's more of a weekend side project/hobby for me.
neill6705

neill6705 to Thane_Bitter

Member

to Thane_Bitter
A little less than 2"

»www.amazon.com/gp/produc ··· F8&psc=1

Thane_Bitter
Inquire within
Premium Member
join:2005-01-20

Thane_Bitter

Premium Member

Thanks, that might work for me, plus it has holes in it which saves trying to cut them.

neill6705
join:2014-08-09

neill6705

Member

Glad I could help! I was pretty happy about the holes in the back as well.

sk1939
Premium Member
join:2010-10-23
Frederick, MD
ARRIS SB8200
Ubiquiti UDM-Pro
Juniper SRX320

sk1939 to neill6705

Premium Member

to neill6705
The other surprising part is that your lab has a dedicated connection/bandwidth to support that. Even my home lab is quasi-isolated from the web (theoretically it can reach the internet).

Sounds like a progressive company tech-wise to allow all of that. Many companies won't let you take home a stapler much less a 881.

tubbynet
reminds me of the danse russe
MVM
join:2008-01-16
Gilbert, AZ

tubbynet

MVM

half of my lab is from my company.
we also support 'cvo' type offices, with proxy ip voice and support dmvpns into different areas into our network.

the iptv solution is pretty cool. no reason it wouldnt work over gre as long as the tunnels are set correctly on the c7606.

q.

sk1939
Premium Member
join:2010-10-23
Frederick, MD

sk1939

Premium Member

Must be nice...maybe one day, although the last thing I need is more equipment right now.

Makes sense, although you still have to have the bandwidth and latency to do so I would claim.

neill6705
join:2014-08-09

1 edit

neill6705

Member

This really isn't that expensive. The 1841 can be had for $20 - 40 and switches similar to my PC5324 for around $50. I got lucky and snagged the UPS for $70. I also got the modem for $45 I think. I did pay full price for my AP and the MyCloud, but that's about it.

Ebay is your friend. Also, I didn't get all of this in a day either. I pieced it together as I could afford it. It's kind of fun that way too, because while you wait ideas pop into your head about how you'll use the equipment once you have it.

As far as my DSL, 20mbps feels like a dream. It sounds crazy to some people, but the best speed I could get was 1.5mbps until a year and a half ago. Centurylink bought Qwest in Minnesota and they've been doing FTTN all over.

tubbynet
reminds me of the danse russe
MVM
join:2008-01-16
Gilbert, AZ

tubbynet to sk1939

MVM

to sk1939
latency isnt as big a factor. remember -- all cvd's for qos place even 'real-time' video in a lower class than voice. streaming video is usually placed just above business critical data (depending on number of classes).
jitter is important, as iptv data is all udp based, so order of packets is important. given modern video compression -- i'd say 2-4mbps is all thats required -- maybe 5-6 for solid hd.

q.

neill6705
join:2014-08-09

neill6705

Member

You are exactly right about the bandwidth for IPTV. It really doesn't take much.

phantasm11b
Premium Member
join:2007-11-02

phantasm11b to neill6705

Premium Member

to neill6705
Looks good. I've nbeen eyeing a Ubiquiti AP for my new house as well. Right now I'm holding off until the builder fixes their blunder though. They terminated all my low voltage cable into the area where the basement bathroom is roughed in.
nyrrule27
join:2007-12-06
Howell, NJ

nyrrule27 to neill6705

Member

to neill6705
what program are you using to rip the blurays. im trying to simplify my setup and have been using 2 programs which is a pain in the butt

sk1939
Premium Member
join:2010-10-23
Frederick, MD

sk1939 to neill6705

Premium Member

to neill6705
No no, what I'm saying is my home lab is more than enough equipment right now that I wouldn't want to remote into a lab unless it had something bigger than a 3845.

Did IPTV work over 1.5Mpbs DSL?

neill6705
join:2014-08-09

neill6705 to nyrrule27

Member

to nyrrule27
I use two programs as well - MakeMKV for the rip and Handbrake for the encoding. I've done it that way pretty much since I started buying DVDs.
neill6705

neill6705 to sk1939

Member

to sk1939
lol OK.

240p YouTube videos didn't work well on 1.5mbps. IPTV? I don't think so.

sk1939
Premium Member
join:2010-10-23
Frederick, MD

sk1939

Premium Member

What kind of runtime do you get with that ups?

neill6705
join:2014-08-09

neill6705

Member

About an hour. With the gear I've got connected it hovers between 17-19% load.
nyrrule27
join:2007-12-06
Howell, NJ

nyrrule27 to neill6705

Member

to neill6705
I'm using the same 2 programs. Lol oh well

tubbynet
reminds me of the danse russe
MVM
join:2008-01-16
Gilbert, AZ

tubbynet to sk1939

MVM

to sk1939
said by sk1939:

No no, what I'm saying is my home lab is more than enough equipment right now that I wouldn't want to remote into a lab unless it had something bigger than a 3845.

labs arent always about size of kit.
i've got racks of 2900s to simulate large scale branch routing. in a lab setting -- unless you're stress testing -- its all about control-plane behaviours. sometimes you need specific (hardware-based) platforms to simulate idiosyncrasies -- but more often than not -- its about how the protocols behave at scale.

q.

sk1939
Premium Member
join:2010-10-23
Frederick, MD

sk1939

Premium Member

True, sometimes its about quantity of the gear for things like that. Mostly my only purpose is for personal knowledge/certifications, so not quite so worried about that.

neill6705
join:2014-08-09

neill6705

Member

I don't do much testing on this setup since my family is actively using it. I use gns3 at home and at work we have a whole room for testing. There's a 7606, an ASR9010, some 3750Gs, a couple 1841s (which will be replaced with 1921s soon I believe), a Calix e5, a couple e7 chassis, and many models of Calix ONTs. There's more that I'm not remembering as well.

jeffmoss26
join:2002-07-22
Beachwood, OH

jeffmoss26 to neill6705

Member

to neill6705
Nice setup. I liked reading the details about your work lab too!
Just wondering the brand of the wall mount rack?

tubbynet
reminds me of the danse russe
MVM
join:2008-01-16
Gilbert, AZ

tubbynet to neill6705

MVM

to neill6705
asr9k is bad ass.
i've got 8 of them in our lab. we do a lot of t1/t2 provider training on them. pbb and evpn stuffs.
if you want to get ahead -- learn xr. learn it well. you'll always have employment.

q.

neill6705
join:2014-08-09

neill6705 to jeffmoss26

Member

to jeffmoss26
Glad you enjyed it! Here is the rack:

»www.amazon.com/StarTech- ··· =6u+rack
neill6705

neill6705 to tubbynet

Member

to tubbynet
I'm pretty new in the field so I haven't done much with it yet but believe me, I will be. We're gradually replacing the 7606s in our fiber rings with 9ks.

sk1939
Premium Member
join:2010-10-23
Frederick, MD

sk1939 to tubbynet

Premium Member

to tubbynet
I personally like the ASR1k series, although I know that the new Cisco 4000 series routers also run IOS-XE now (that, a a couple other things make it different from the 3945E).