http://www.dslreports.com/forum/r3740848 en Tue, 01 Dec 2009 02:57:33 EDT Tue, 01 Dec 2009 02:57:33 EDT http://www.dslreports.com/forum/remark,3756581 Compman21 : Ah and yes to answer a email i got from someone on the boards..yes the red wan light was on that was its final "red flag" now all it does it look like a light show and nothing more lol.]]> http://www.dslreports.com/forum/remark,3756581 Fri, 05 Jul 2002 17:58:48 EDT http://www.dslreports.com/forum/remark,3756564 Compman21 : Last better pic of the broken capacitor

]]> http://www.dslreports.com/forum/remark,3756564 Fri, 05 Jul 2002 17:56:17 EDT http://www.dslreports.com/forum/remark,3747941 Bill_MI : Duh!!! That's Compman's V2!!! Sorry 'bout that confooosion of mine. :-)]]> http://www.dslreports.com/forum/remark,3747941 Thu, 04 Jul 2002 14:22:12 EDT http://www.dslreports.com/forum/remark,3747753 JrC384k : Uh...I mentioned above that it was a broken hub. I don't use it anymore but I bust it out every now and then for a LAN party. No tool marks here. I didn't even have to pry the front off. I just grabbed it by the legs and pulled.
--
If it ain't broke, I'll fix that!]]> http://www.dslreports.com/forum/remark,3747753 Thu, 04 Jul 2002 13:52:49 EDT http://www.dslreports.com/forum/remark,3745718 Bill_MI : Whoa... what did I start here? LOL!

Jr, that must be a V2 since it has 1 board. My early-V1 is a few months over 2 years old now and has 2 boards with a tin-post connector between them. The processors are the same. Hey.... your FLASH isn't in a socket is it? (the square chip with the label). That would make it harder to self-recover from corrupted firmware. :-)

BTW, you're good if you didn't leave *any* tool marks. I wasn't that meticulous. ;-)
[text was edited by author 2002-07-04 07:59:42]
]]> http://www.dslreports.com/forum/remark,3745718 Thu, 04 Jul 2002 07:45:42 EDT http://www.dslreports.com/forum/remark,3744946 JrC384k : I like to take stuff apart too. The Linksys boggled me since there were no screws. I didn't wanna rip the little rubber feet off to look for screws since that would show I tampered with it. I didn't wanna pull the two top halves apart because I was afraid I would break it (note that if I did do that, it would have been broken). I never would have thought to do that. Once I did as Bill said, it all fell into place.
--
If it ain't broke, I'll fix that!]]> http://www.dslreports.com/forum/remark,3744946 Thu, 04 Jul 2002 02:50:12 EDT http://www.dslreports.com/forum/remark,3744918 Link Logger : Gosh whoever would have guessed that Bill would know how to remove the cover!?!? I'm betting covers don't last long at your place Bill before you have taken things apart and rebuilt them.

Bill you remind me of a research dude I once knew who covers rarely made it past his living room when he brought stuff into his house (no lie he had empty covers, boxes etc all over his living room, needless to say he was single as his living room was little more then a preliminary disassembly area). Nothing electronic in his house had a cover on it and usually everything had been improved by customizing as well. Most of his stuff he had, he built from scratch (meaning built his own circuit boards on up) as well (Stereos, Computers, Testing Equipment, Creations etc). The guy was truly amazing.

Blake
[text was edited by author 2002-07-04 03:07:28]
]]> http://www.dslreports.com/forum/remark,3744918 Thu, 04 Jul 2002 02:45:41 EDT http://www.dslreports.com/forum/remark,3744911 JrC384k : Even more...

]]> http://www.dslreports.com/forum/remark,3744911 Thu, 04 Jul 2002 02:44:37 EDT http://www.dslreports.com/forum/remark,3744910 JrC384k : More....

]]> http://www.dslreports.com/forum/remark,3744910 Thu, 04 Jul 2002 02:44:26 EDT http://www.dslreports.com/forum/remark,3744908 JrC384k : Thanks for telling me how to take this thing apart. It had a "broken" 3rd port ever since I got it. I never wanted to RMA it since I had a LAN to provide to. Well I took the thing apart and I fixed the problem. Looks like quality control isn't at its best. Two "wires" from the broken jack were bent so they touched each other inside right above the point where they meet the PCB. A simple tootpick separated the two wires and now the port is fixed....

To show my thanks here are step by step photos of the procedure.
--
If it ain't broke, I'll fix that!

]]> http://www.dslreports.com/forum/remark,3744908 Thu, 04 Jul 2002 02:44:15 EDT http://www.dslreports.com/forum/remark,3744791 JGMACK : A lak off compacity to spel bi the deezyner of the knu souper roota.]]> http://www.dslreports.com/forum/remark,3744791 Thu, 04 Jul 2002 02:21:44 EDT http://www.dslreports.com/forum/remark,3744525 No_Strings : I know it's bad form, but for the love of Michael Faraday, can you please learn to spell capacitor?
--
Don't ask me what I think of you, I might not give the answer that you want me to.]]> http://www.dslreports.com/forum/remark,3744525 Thu, 04 Jul 2002 01:40:24 EDT http://www.dslreports.com/forum/remark,3743785 Compman21 : more Pics

]]> http://www.dslreports.com/forum/remark,3743785 Thu, 04 Jul 2002 00:04:14 EDT http://www.dslreports.com/forum/remark,3743781 Compman21 : Pics

]]> http://www.dslreports.com/forum/remark,3743781 Thu, 04 Jul 2002 00:03:34 EDT http://www.dslreports.com/forum/remark,3743654 Compman21 : ahaha look what i started..and yes i will post pics ]]> http://www.dslreports.com/forum/remark,3743654 Wed, 03 Jul 2002 23:48:54 EDT http://www.dslreports.com/forum/remark,3743365 JrC384k : Will this break it? I have a hub that I don't use and is still functional. I wanna take it apart but I don't wanna break it.
--
If it ain't broke, I'll fix that!]]> http://www.dslreports.com/forum/remark,3743365 Wed, 03 Jul 2002 23:14:00 EDT http://www.dslreports.com/forum/remark,3742739 Zorack : w00t if you do that and it works(the 300mhz processor and add becoups of ram,)ya I wanna know too,I bet that would be sweet! ]]> http://www.dslreports.com/forum/remark,3742739 Wed, 03 Jul 2002 21:59:22 EDT http://www.dslreports.com/forum/remark,3742720 Bill_MI : Aw... sounds like you left the active material out of that "compacitator". Don't tell anyone but us engineers only package smoke in them things. The unit works fine until you let the smoke out of those packages then it's broken. :-) :D

Pictures? If you've seen one Samsung processor with an ARM7 core and a bunch of peripherals you've seen 'em all. :-)]]> http://www.dslreports.com/forum/remark,3742720 Wed, 03 Jul 2002 21:57:22 EDT http://www.dslreports.com/forum/remark,3742440 pH1 : post some pics once you open it please :-)]]> http://www.dslreports.com/forum/remark,3742440 Wed, 03 Jul 2002 21:28:48 EDT http://www.dslreports.com/forum/remark,3742343 Compman21 : Yeah i got my 1 port open but then decieded hell with it and popped open my 4port router to discover my problem with it (A Compacitor had been blow up)... I wondered what was ratteling around in there..heh..So im going to try and get a compacider and stick redo the whole thing, maybe add more rom to it heh hell while im at it i should try somehow getting my pent 300 chip on this board somehow to make the router faster :P]]> http://www.dslreports.com/forum/remark,3742343 Wed, 03 Jul 2002 21:18:30 EDT http://www.dslreports.com/forum/remark,3741941 Bill_MI : Well I like to help those that like to open things. :-)...

Is this a BEFSR11? On the sides there's a vertical seam that should be 2 different colors (Blue/Black?). The trick it to pry apart at this seam to pop the front off - it's a slick design. :-)]]> http://www.dslreports.com/forum/remark,3741941 Wed, 03 Jul 2002 20:37:28 EDT http://www.dslreports.com/forum/remark,3741408 PapaDos : ????????

You have a one port switch ?????
You want to "build" your own router using Linux and for that you need to destroy the Linksys router ?????

I am completely lost :)...
--
Nunc est bibendum...]]> http://www.dslreports.com/forum/remark,3741408 Wed, 03 Jul 2002 19:38:06 EDT http://www.dslreports.com/forum/remark,3740848 Compman21 : I have a old 1 port router laying around that only the switch works, im thinking about building my own router using linux,ect. but i cant get the stupid cover off the router to get to the board. (and for you warrenty freaks out there, this router is way past warrenty) So if u know how or have links please let me know as im about to cut er open lol.]]> http://www.dslreports.com/forum/remark,3740848 Wed, 03 Jul 2002 18:32:40 EDT