 parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | reply to apilosov
Re: NYC/DirecTV Broadband Gateway reprogramming That was quick. Motorola took only 30 minutes to get back to me.
Processors!
»e-www.motorola.com/webapp/sps/si···DFTQDKCb
»e-www.motorola.com/webapp/sps/si···DFTQDKCb
--
"We will add your biological and technological distinctiveness to our own. Your culture will adapt to service us. Resistance is futile. We are the Borg." 3.333GHz CRUNCH! CRUNCH! |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | reply to apilosov
x1 board, there is a socketed chip. I wonder whether I can read it....
»www.associatedpro.com/eprom.pdf
I guessed that it would be an atmel eeprom. That's just what it is 
AT17C512
»dslproject.speedconnect.us/pictures
--
"We will add your biological and technological distinctiveness to our own. Your culture will adapt to service us. Resistance is futile. We are the Borg." 3.333GHz CRUNCH! CRUNCH! |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | reply to apilosov
Where can I find a 56 pin SSOP to SMC adapter, and then a 56 pin SSOP to DIP adapter for the programmer? I'm NOT paying $250 for a little piece of plastic with some gold covered tin leads.
--
"We will add your biological and technological distinctiveness to our own. Your culture will adapt to service us. Resistance is futile. We are the Borg." 3.333GHz CRUNCH! CRUNCH! |
|
| reply to SMCinAZ
I have about 20 ADSL boxes retired from clients using DTV Internet. One is a white box, what I think everyone is referring to as "brick". Question: Are these worth attempting to us as ADSL routers for other ISP accounts? What will we gain by figuring out the admin password? If these gateways are worth anything how can anyone get a admin password? |
|
|
|
| reply to apilosov
Mike, please read the entire thread. It's all explained in www.pilosoft.com/modem.txt |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | reply to mikemegapath
I sent you a message, mikedirectv. Click the flashing yellow note thing to get it.
Thanks. |
|
| reply to anonymous2000
the subnet mask is 255.255.255.252
and the IP you will need to use is the gateway address which should be 10.5.1.2 |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | Parts for the BDM come today, within the hour. Woot! Woot! |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | Parts are now in |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | reply to apilosov
Can someone try to positively identify which pins the BDM connect to? Thanks. |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | Rough PCB is now diagrammed. |
|
parasonicI Am Not A Bot
join:2002-03-29
Atlanta, GA | 12-conductor cable also is in |
|
| I would like to learn more about what you are doing. I am guessing you are trying to reprogram the flash. BDM is a hardware connected Debugger? I was trying to learn this stuff but it is difficult for an absolute newbie. |
|
| I just recently got canned from DTV and switched to Earthlink DSL (which really sucks by the way). I've been searching for a way to reprogram my X203 but have been unsuccessful as well. If you come up with something it would be appreciated. |
|
| reply to DSLTech5
Anyone want my gateway? Willing to give away my gateway for shipping + $5. Says model 10-X203 on back. Can ship whole box came in(6 lbs) incl filters, etc or just the gateway(lighter, less $$). Email if interested. It pisses me off thousands of these buggers are going to the landfills. |
|
 Yakup
join:2000-10-12
Folsom, CA | reply to parasonic
DTV flash things quote:
Jtag software that allows you to dump or program flash chips. This should work with just about any device that uses an ST-20 based processor. (sti-5500, sti5505, sti5510, ect)
This version has serial eeprom programming capability, and fully supports the intel 28F320 flash type.
»www.unwink.com/ go to files
there is a jtaj programmer for intel whatsoever flash chips
I think DTV found those flash things very cheap and put them in everything they built.
--
DUDE WHERE IS MY WINGS |
|
