dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
163

FKrooG2
Working my way back
Premium Member
join:2000-09-28
Tha Zone

3 recommendations

FKrooG2 to Gargoyle

Premium Member

to Gargoyle

Re: update on foldy2

Well it is not a very clean setup yet because 1: they are not sitting at the spot they will be running at and 2: they are not bouncing yet....



For the rack I used a shoe rack that had 25 places. I removed every other horizontal shelf so that there would be enough room to mount them. And the distance from HSF to the board is about 1/2.... For this reason I plan to mount fans pushing air from the rear to the front...



From this picture it is hard to see how I mounted the mobos to the rack. I purchased a 1/16 drill bit and created a hole layout with some paper then transferred to hole layout to each location I wanted to mount a mobo... Drilled the holes and used small wood screws to mount them without going thru to the other side...

Once cleaned up this will look great....

Icarus
CHAOS RULES
Mod
join:2000-11-08
Off Center

Icarus

Mod

Looking good FK! Nice job!

Where ya storing your shoes now?

Gargoyle
MVM,
join:2000-12-29
Planet X

Gargoyle to FKrooG2

MVM,

to FKrooG2
FYI - I will try to post one of these Foldy2 pics on the website this weekend. MB is trying to get some clear shots of Foldy1 for me. And also I will try to finish off the pages for the automatically generated kdfold stats from both Foldy1 and Foldy2.