 NutCase4Mad OverclockerPremium
join:2001-12-10
Livermore, CA
| reply to Exit
Re: Droop mod said by Exit:
Take any pics?
I don't thing the cpu voltage was holding you back. I think watercooling the NB and good cooling on the cpu is the only way to get over 300FSB stable. Also you have to up the agp/pci speed to 70Mhz before you up the fsb over 300. Also if your on an S-ata drive you won't be getting over 300 because the controller dies 
Sorry I did Not Take any Pics.. That Mod was a PAIN to do as the Chip is under the HSF Mount on the P4C800 Deluxe..
The NB is Water cooled along with the Cpu, and I do have 2 SATA drives connected to the Promise controller, but that is disabled right now, so it is just running a regular drive. It did hit 101F here today, so that may have played some part in it..
AGP is set at 70Mhz right now, so that is not it. I have noticed though, the Higher the Vcore is on mine the More unstable the system gets 
I just wish why it corrupted the Bios when I went to 5:4 divider though?
Oh well, I guess the Water chiller gets ordered tomorrow (or maybe a Vapochill  )..
Edit: just ordered this chiller:
»www.aquastealth.com/product.asp?···245&3=96
[text was edited by author 2003-09-22 03:18:30] |
