 72245156TSWB.orgPremium,ExMod 2000-04
join:2000-07-11
Winnipeg, MB | reply to alibaba7
Re: 7004VBR freezing every couple hours said by alibaba7:
BTW Kinguni, what firmware version are you using ?
1.23, same as you.
--
Join Team Starfire SETI@Home
Put your unused clock cycles to work! |
|
| So I'm using the SMC2804WBR, but it does sound like I might be able to incorporate your solution.
I copied your settings for the Intrusion Detection page, but I'm afraid I don't really understand MAC filter settings. Can you point me to a page that would walk a newbie through how they work?
Thank you. |
|
72245156TSWB.orgPremium,ExMod 2000-04
join:2000-07-11
Winnipeg, MB | It's very simple if the pages are the same as for the 7004VBR. From the firewall tab click on MAC Filter. Now, making sure you know the MAC addresses of your computers, enter them on this page. It's easy if your computers get their IP's by DHCP since there is a drop down list at the bottom of the page to copy them into each ID. Make sure MAC address control is set to yes and then click apply.
If I have more time I'll take a look at the manual for your router which should have instructions regardless.
--
Join Team Starfire SETI@Home
Put your unused clock cycles to work! |
|
|
|
