 Bob CarrickPremium,ExMod 2002
join:2000-04-24
New York, NY | Windows 95, 98, ME
1. Right click on Network Neighborhood (My Network places)
2. Choose "Properties"
3. A new window will open
4. Highlight the TCP/IP bound to the Ethernet card that is connected to the DSL Modem
5. Click "Properties"
6. Choose the "IP Address" tab, specify, type 192.168.0.15
7. Set the subnet mask to 255.255.255.0
8. "OK"
Windows 2000
1) Right click "My Network Places" -> Choose "Properties"
2) Right click the icon for your Ethernet adapter -> Choose "Properties"
3) Highlight the "Internet Protocol (TCP/IP)" listing
4) Click "Properties"
5) Click on "Use the following IP address"
6) Type in 192.168.0.15
7) Set the subnet mask to 255.255.255.0
Windows XP
1) Go to "Start" -> "Control Panel"
2) Click on "Network & Internet Connections"
3) Click on "Network Connections"
4) Right click on the icon for your Ethernet card connected to your DSL modem _> Choose "Properties"
5) Click on "Internet Protocol (TCP/IP) -> Click "Properties"
6) In the "General" tab check off "Use the following IP address"
7) Type in 192.168.0.15
8) Enter a subnet mask of 255.255.255.0
9) Click "OK"
10) Click "OK"
--
Bob -»www.carricksolutions.com - PPPoE / Broadband help website - EnterNet, Tango, WinPoET, MacPoET, RASPPPoE, Access Manager, Broadjump, NetVoyager, CFoS, Friendly, and Networking |
| Bob Carrick,
Thanks for the quick reply. I thought that I had done something similiar to your response. I had forgotten to mention my OS. It is WinME. Thanks again for a great product and your willingness to distribute it to us (the public).
I will be sure to write the solution down this time. 
I hope you have a great holiday season. 
Steve |
