http://www.dslreports.com/forum/r8919281 en Thu, 10 Dec 2009 18:18:46 EDT Thu, 10 Dec 2009 18:18:46 EDT http://www.dslreports.com/forum/remark,8966934 Awdieee : I wish I knew someone that does that. I'm trying to see if someone on the forum that will help me install the splitter. Thanks.

Lee]]> http://www.dslreports.com/forum/remark,8966934 Sat, 03 Jan 2004 14:05:13 EDT http://www.dslreports.com/forum/remark,8965893 McSummation : It was easy. (But, then, I've been messing with wiring and stuff like that since I was 8 years old. :))

Do you have a friend that's a "handy man"? Actually, it doesn't take many skills. There aren't that many connections on the splitter I got. And, they are clearly labeled. The instructions were also pretty clear.]]> http://www.dslreports.com/forum/remark,8965893 Sat, 03 Jan 2004 12:05:35 EDT http://www.dslreports.com/forum/remark,8965618 Awdieee : That looks rather complicated. Did you installed the splitter yourself? If I were to ask someone to install it for me, whom should I call? Thanks.

Lee]]> http://www.dslreports.com/forum/remark,8965618 Sat, 03 Jan 2004 11:26:55 EDT http://www.dslreports.com/forum/remark,8953498 McSummation : There's a FAQ about where to get splitters ( »AT&T Southeast Forum FAQ »Splitter, DSL/POTS ? Where can I get one? ). I don't think you'll find them at RatShack.

Here's a link to the one I got: »www.allentelproducts.com/Catalog···PID=2010

Here's the invoice information I got:
1 - Allen Tel AT626DSL - DSL Splitter Outdoor Device @ $39.99ea. = $39.99
--------------------------------------------------
SubTotal = $39.99
Shipping & Handling (4 - 6 Days Delivery) = $5.00 (Residential Delivery)
State Sales Tax = $0.00
--------------------------------------------------
Total for Order = $44.99]]> http://www.dslreports.com/forum/remark,8953498 Fri, 02 Jan 2004 00:28:15 EDT http://www.dslreports.com/forum/remark,8953264 Awdieee : I'll see what I can find out tommorrow. Is the splitter readily available from Radio Shack or any electronic store or is this something I need to buy online? Thanks.

Lee]]> http://www.dslreports.com/forum/remark,8953264 Thu, 01 Jan 2004 23:56:33 EDT http://www.dslreports.com/forum/remark,8946645 McSummation : A "splitter" is a device that is better than a filter.

A filter is placed between POTS (Plain Old Telephone Service) devices and the line to keep the POTS devices from draining off the high frequency signals that DSL uses.

A splitter goes out next to the NID. The one I have (and they may all be this way) has active circuits in it (a transistor) that splits the signal into low frequency and high frequency portions and puts them out onto separate connectors that go to the POTS lines and the home-run (CAT5) to the modem. This circuitry also does a combining function to the signals going back toward the phone system.

The FAQ articles on this indicate that the splitter is the preferred device, especially if you already have a home-run.

Did this make sense?]]> http://www.dslreports.com/forum/remark,8946645 Thu, 01 Jan 2004 10:58:45 EDT http://www.dslreports.com/forum/remark,8946579 Awdieee : Now I'm confused. I'm using a Cat5 wire connecting to the NIC to the modem. When you said "Splitter", is that the filter?

Lee]]> http://www.dslreports.com/forum/remark,8946579 Thu, 01 Jan 2004 10:49:37 EDT http://www.dslreports.com/forum/remark,8944225 McSummation : The flat stuff can pick up noise (hum) from other electrical devices. This can cause errors. Did ADSL Guy have you unhook everything but the modem? If not, you might try that and do another Tweak and Line Quality test to see what happens.

To clear up problems I had, I finally replaced the wire that ran to the modem with cat3 and put a splitter at the NID. My service became very stable after I did that. I wish now that I had put in cat5.]]> http://www.dslreports.com/forum/remark,8944225 Wed, 31 Dec 2003 23:37:06 EDT http://www.dslreports.com/forum/remark,8944137 Awdieee : I'm using the plain old flat type to connect to the modem and I am pretty much closest to the box as we speak.

Lee]]> http://www.dslreports.com/forum/remark,8944137 Wed, 31 Dec 2003 23:21:47 EDT http://www.dslreports.com/forum/remark,8943908 McSummation : Did you let the hawgs gnaw on it? :)

He probably can't tell if it's the wiring in your house or theirs, though, right?

How about the 2 questions I posed in my last post?]]> http://www.dslreports.com/forum/remark,8943908 Wed, 31 Dec 2003 22:45:02 EDT http://www.dslreports.com/forum/remark,8943600 Awdieee : 7h58m : 2003-12-31 13:03:19 : From ADSL Guy block ... delete-this ... keep-this
ADSL Down
Relative Capacity Occupation (0 - 100%) 100
Noise Margin (0 - 31 dB) 3
Transmitted Signal Power (0 - 20 dB) 14
Signal Attenuation (0 - 60dB) 53
Max Attainable Bit Rate on Fast Channel (Kbps) 576
Max Attainable Bit Rate on Interleaved Channel (Kbps) 576
Fast Channel Bit Rate (Kbps) 768
Interleaved Channel Bit Rate (Kbps) 0
Fast Cell Count (Kbps) 70796668
Interleaved Cell Count (Kbps) 0
ADSL Up
Relative Capacity Occupation (0 - 100%) 60
Noise Margin (0 - 31 dB) 16
Transmitted Signal Power (0 - 20 dB) 12
Signal Attenuation (0 - 60dB) 43
Max Attainable Bit Rate on Fast Channel (Kbps) 704
Max Attainable Bit Rate on Interleaved Channel (Kbps) 704
Fast Channel Bit Rate (Kbps) 384
Interleaved Channel Bit Rate (Kbps) 0
Fast Cell Count (Kbps) 13132694
Interleaved Cell Count (Kbps) 0

According to ADSL Guy, there's something wrong with my wiring. I had already double check my filter and wiring and everything seems to be in check.

Lee]]> http://www.dslreports.com/forum/remark,8943600 Wed, 31 Dec 2003 22:03:36 EDT http://www.dslreports.com/forum/remark,8935205 McSummation : OK, let me describe what I'm looking at.

1) Look at the EC (East Coast) plot and compare it with the WC (West Coast) plot. The WC plot is (mostly) flat on top. That's the way it ought to be. The EC plot, on the other hand, has a "saw tooth" pattern. Not good.

Now, where's the problem?

2) Look down the columns of numbers. I'm looking at best, avg, and worst. On each row, look at the difference between best and worst. If there is a small difference (like a millisecond), that's good. Look at the "(YOUR ADDRESS)" line of the EC data - the difference is 16 ms. Not good. Same line in the WC data has a difference of 62 ms. Those lines are the only ones that have differences above 1 ms.

Therefore, the problem is between rback2-fa2-0.fyvlar.swbell.net (your gateway into the SBC network) and your computer.

Now, the problem is: what's causing the problem? We start with:
»Tweaking FAQ »What does power-cycle my modem mean and how do I do it?
»/faq/5322
I posted those earlier, but I don't know if you did them.

Additional questions:
1) What type of wiring goes to the modem? Is it "plain old flat phone extension" wire? Or is it "twisted pair" cable - like cat3/5/5e/6 cable?
2) Can you move the modem close to the NID (the gray box on the back/side of the house) and see if the errors go away?

Let's stop there and let you catch your breath and get a few winks of shut-eye. :)]]> http://www.dslreports.com/forum/remark,8935205 Wed, 31 Dec 2003 01:04:43 EDT http://www.dslreports.com/forum/remark,8935074 Awdieee : Line quality test :

»/quality/nil/1257158

Not sure if I understand what it says though.]]> http://www.dslreports.com/forum/remark,8935074 Wed, 31 Dec 2003 00:49:23 EDT http://www.dslreports.com/forum/remark,8934885 McSummation : To answer your first question, I don't know if "DSL Speed" affects it or not. We only use DrTCP here on this site. Some do appear to cause problems, but I don't know about this one. I'm still one of the "new kids on the block", so if one of the "old timers" comes along, maybe they'll have some information about it.

However, if you can disable it, it would help me analyze what's going on relative to your inconsistent speeds. (As an old IBM performance analyst, I believe in eliminating as many variables as possible when looking for something like this.)

I know you've run Line Quality tests before, but, run another one, making sure you are pingable.]]> http://www.dslreports.com/forum/remark,8934885 Wed, 31 Dec 2003 00:25:01 EDT http://www.dslreports.com/forum/remark,8934665 Awdieee : Speed test result :

»/speedtests/39···72846511

Hmmm, I'm getting anywhere from 98-530kb for downloads, it seems rather erratic and inconsistent. What's wrong with my connection?

Lee]]> http://www.dslreports.com/forum/remark,8934665 Tue, 30 Dec 2003 23:56:51 EDT http://www.dslreports.com/forum/remark,8934632 Awdieee : Tweak test results :
»216.254.95.40/tweak/block:37a903···nXPpppoe]]> http://www.dslreports.com/forum/remark,8934632 Tue, 30 Dec 2003 23:53:17 EDT http://www.dslreports.com/forum/remark,8930634 Awdieee : I'm using DSL Speed for optimizing. Does that affect anything?]]> http://www.dslreports.com/forum/remark,8930634 Tue, 30 Dec 2003 16:25:40 EDT http://www.dslreports.com/forum/remark,8927071 McSummation : Have you run another "broadband optimizer"? (We're investigating issues related to DrTCP not being able to modify some things after other programs have run.)]]> http://www.dslreports.com/forum/remark,8927071 Tue, 30 Dec 2003 09:54:43 EDT http://www.dslreports.com/forum/remark,8926146 Lanik : Are you logging in as an administrator and/or do you have administrative privileges on your PC?
--
A slave to corporate America.]]> http://www.dslreports.com/forum/remark,8926146 Tue, 30 Dec 2003 05:56:48 EDT http://www.dslreports.com/forum/remark,8924934 Awdieee : Yep, no matter what I do, the value are still the same.]]> http://www.dslreports.com/forum/remark,8924934 Tue, 30 Dec 2003 00:36:17 EDT http://www.dslreports.com/forum/remark,8924710 McSummation : The RWIN in the Tweak test you posted still shows the large value. Did you do the "save, exit, and reboot" after changing it in DrTCP?]]> http://www.dslreports.com/forum/remark,8924710 Tue, 30 Dec 2003 00:09:31 EDT http://www.dslreports.com/forum/remark,8924603 Awdieee : Speed Test :
»/speedtests/13···72759997

Tweak Test :
»216.254.95.40/tweak/block:396dfa···nXPpppoe

Line quality test :
»/quality/nil/1256092
»/quality/nil/1255725
»/quality/nil/1253081
»/quality/nil/1255661
»/quality/nil/1255638]]> http://www.dslreports.com/forum/remark,8924603 Mon, 29 Dec 2003 23:57:56 EDT http://www.dslreports.com/forum/remark,8920207 McSummation : Please drop the RWIN value to what I posted up above and do another Tweak, Speed, and Line Quality tests.]]> http://www.dslreports.com/forum/remark,8920207 Mon, 29 Dec 2003 16:48:55 EDT http://www.dslreports.com/forum/remark,8920040 Awdieee : »/speedtests/42···72733380]]> http://www.dslreports.com/forum/remark,8920040 Mon, 29 Dec 2003 16:30:15 EDT http://www.dslreports.com/forum/remark,8920021 Awdieee : »216.254.95.40/tweak/block:1ee333···nXPpppoe]]> http://www.dslreports.com/forum/remark,8920021 Mon, 29 Dec 2003 16:28:37 EDT http://www.dslreports.com/forum/remark,8919714 McSummation : Let's try one thing while you're doing those:
-Download Dr.TCP.
-Set the TCP Receive Window (RWIN) to 32120.
-Set everything with a pull down option/menu to Default.
-Blank/Clear all other fields.
-Save.
-Reboot.
-Post an up-to-date tweak test.
-Post the results of the speed test nearest you.]]> http://www.dslreports.com/forum/remark,8919714 Mon, 29 Dec 2003 15:56:22 EDT http://www.dslreports.com/forum/remark,8919655 McSummation : The Tweak and Line Quality tests are inconsistent. The Tweak test says you are pingable, but the Line Quality test says you're not. Did you change something between the two tests that would have affected this?

You have retransmission errors. That will affect your speeds. We need to get the errors cleared up, then we can proceed with tweaking. Try these:
»Tweaking FAQ »What does power-cycle my modem mean and how do I do it?
»/faq/5322]]> http://www.dslreports.com/forum/remark,8919655 Mon, 29 Dec 2003 15:49:58 EDT http://www.dslreports.com/forum/remark,8919281 Awdieee : Hello everyone, I'm getting weird readings, hopefully someone can give me some insights to help boost my downloads speed. Thanks.

1.»216.254.95.40/tweak/block:2955a6···nXPpppoe
2.»/speedtests/21···72728289
3. »/quality/nil/1255661
4. DSL and SWBell.
5. WinXP PPPoE.
6. WinXP PPPoE.
7. WinXP.
8. 1500/256.
9. No.
10. If you use a NAT router (Linksys, Netgear, etc.) for sharing your connection and if so, the brand and model of your router.
11. 14,700ft.]]> http://www.dslreports.com/forum/remark,8919281 Mon, 29 Dec 2003 15:16:58 EDT