 MalvagiaPremium
join:2003-10-04
Settima Foce | reply to Malvagia
Re: Wireless Zero Configuration Problems I uninstalled all of the windows hotfixes one at a time last night, with no change to the problem.
I didn't get a chance to try it with a different adapter.
Later today I will try that. If it doesn't work, I will reinstall the OS and then reinstall the hotfixes one at a time, testing to see if the problem occurs after each install.
From what I read on other forums and in the microsoft kbase, the only known issue that sounds similar is caused by installing the hotfix to add WPA support, and then not using any encryption on the network. I am still a little skeptical about this though, because I do have that hotfix installed on other computers that are also not running any encryption.
If anyone has any other suggestions before I nuke the OS, please let me know. |
|
|
|
 JohkalCool CatPremium,MVM
join:2002-11-13
Happy Valley
kudos:5
 ·Comcast
 ·Comcast Digital ..
1 edit | I had a similar issue with one of my WUSB11s. I bought two at the same time & place. I installed the one with out any issues. The 2nd one acted as you are describing. I pulled my hair out trying everything to get it to work. I was ready to take it back when I decided to uninstall it and use the Cd from the other WUSB11. It worked. Who would have known. I don't know whether this will help you, but good luck! Also, eliminate the router firmware issue by flashing back to 1.45.7
--
Never wrestle a pig. You both get dirty and the pig likes it. |
|
