Cisco → Re: 831 Bootstrap help

If you are directly consoled into the router, could you go ahead and open a new hyperterminal session with these settings:

Bits per second: 1200
Data bits: 8
Parity: None
Stop Bits: 1
Flow control: None

Once this is open, powercycle the router and press the spacebar for like 10 seconds (press and release) if you are able to see the rommon prompt, change the register back to normal by typing:

rommon>confreg 0x2102
rommon>reset

if you are not able to see anything on the screen, close the window and open a new one with these settings:

Bits per second: 9600
Data bits: 8
Parity: None
Stop Bits: 1
Flow control: None

And you should now see the rommon> prompt change the register from there. And router should be back in normal mode.

kewl i will try this

okay fellas i would jsut like to give the gold metal to covenant hes is the man that gave the correct awsner to the problems and has fixed my router issue its up and runing..

covenant thanks man your are the guro for cisco..