sonettech
join:2004-06-08
Dallas, TX
| help with new to me 3220-h I've been haviong problems with my old modem and I got another from work. I have tried all the ip adresses »cayman-dsl' or '»192.168.1.254 and it will not go anywhere. This 3220 is not new, is there any way to reset it to factory specks?? | |
|
 public
join:2002-01-19
Santa Clara, CA | Re: help with new to me 3220-h Use the console port in the back to reset the password, and the LAN ip. Then you can login via the LAN, and use the web setup. | |
|
|
sonettech
join:2004-06-08
Dallas, TX | I cannot select my network card for telnet, with hyper terminal, I will try with Pro Comm+. Any other ideas???? PLease help. | |
|
dgilbert
Good Bye My Friend
Premium,MVM
join:2002-06-15
none
clubs:
1 edit | if you cannot access the cayman at 192.168.1.254, first you need to see what your default gateway is. to do this, goto a command prompt and type in "ipconfig /all" without the quotes, and hit enter. if your address comes up as 169.x.x.x, then you are not getting an ip from the router. if it comes up as any other ip, it should list a gateway, this will be the ip address of the 3220 that you would need to enter in your browser or telnet program. although it won't do much good without the password!
if you are not getting an ip from the 3220, you need to set your NIC to a static ip of 192.168.1.x, subnet 255.255.255.0 and see if you can access it. if not, you MUST use the serial port to access the 3220. this is actually your best bet, it will save on headaches.
also, by not being able to select your network card, do you mean it does not give you a choice for TCP/IP?
--
If you can read this, thank a teacher..........and since it's in English, thank a soldier. | |
|
ucc
Premium
join:2000-09-25
Marietta, GA | Did you try with a "dot" after "cayman-dsl"? THe "dot" character, not the word. cayman-dsl. | |
|
sonettech
join:2004-06-08
Dallas, TX
| the address I am getting when I do the ipconfig is 169.254.22.69 so it wasprobably set up for a static ip. I have dynamic, and need to set the modem up for that. and enable the dhcp. So were do I put my user name and password into this thing and how do you enable dhcp. I found the dhcp setting and it says it is off put how do you turn it on?? Access through the db9 with Procomm+ is fine. | |
|
LBB
Premium,MVM
join:2001-06-14
Bama
 ·AT&T Southeast
| First, you need to reset the modem to factory default as layed out here.
»Cayman Routers »How do I clear the configurations through a Telnet Session?
Since you can access the Cayman thru the console, just do steps 2 - 6.
Once complete the Cayman will restart and you can release and renew the ip of the PC by going to the command prompt and typing in ipconfig /release and then type in ipconfig /renew or just reboot the PC.
LB | |
|
 | sonettech
join:2004-06-08
Dallas, TX | Re: help with new to me 3220-h Ok I finally got the thing reset. But I do not have the option for pppoe under my dsl/atm options I saw a friends settings and he had the option for pppoe-llc. I do not I only have ppp-llc, and ppp-vc . Is this a firmware issue??? | |
|
|
sonettech
join:2004-06-08
Dallas, TX | looks like I am running firmware 2.5 with no pid. I cannot do the upgrade because I have no internet connection, because the modem does not have ppoe on it. Any other sugestions | |
|
|
dgilbert
Good Bye My Friend
Premium,MVM
join:2002-06-15
none
clubs:
1 edit | Re: help with new to me 3220-h ppp-llc IS ppoe. it is just the older cayman terminology.
and you can download the file thru another connection, then upload it to the cayman. your PID is also listed on the bottom label. goto »www.netopia.com/en-us/equipment/···man.html and choose your PID. if you do not have a PID, use the first set. remember to get both the updater and the firmware, then run the updater first. | |
|
|
|
|
