 kmac1Off in new directionsPremium,VIP
join:2001-06-07
Port Neches, TX | reply to kmac1
Re: Office Install With Pictures!!! As you can see from the finished DMARC I have "killed" the bridge to accomplish isolating the IW I wanted to use for my DSL. Instead of dialtone coming across the bridge, it's fed from the filter. Like I said before, move the clips over pins 1 & 2. This will keep them safe for later use and not be in bridge mode.
After punching down the DSL wire on the IW block, the only thing left to do is wire up the dedicated jack.
If your situation is one where you have a LAN and it's in the same location you can just run the wire(unfiltered) straight from the filter box over to the jack. Mount it somewhere close to the router(if you have one) or mode. I usually mount the jack on the backboard at a close edge.
Hope this helps and let me know if I can help with any questions you might have or need any advice.
--
DSL- It's not just a job, it's an Adventure!!! |
