Arno Nym
| reply to TheIndividual
Re: Analysis of the Alchemy 5.1 binaries
A backdoor or phone home function is still possible if it is in every firmware binary. I only checked for differences. I have yet to compile my own binary. Sifting through the whole source for trojan code would take a long time.
The squash filesystem has a magic number. Open the firmware image with a hexeditor and look for hsqs (0x68 0x73 0x71 0x73) or shsq (0x73 0x68 0x73 0x71). In the Alchemy 5.1 binaries, this signature is found at offset 0xB84A0. Copy everything from that point on into a new file. This file can be mounted on a system with a matching squashfs driver (mount -o loop -t squashfs image.sqfs /mnt). The squashfs 2.0 final driver does not recognize the filesystem images from Alchemy 5.1, but the squashfs source from the Alchemy source package can be compiled on an i386 as well. To create a new squashfs image, you would have to use the binary only mksquashfs from the Alchemy source package, concatenate the resulting image file with a header and a kernel and adjust the checksum in the header. This could be the point where the tag is created, so check the resulting filesystem image. You could also try using the newer mksquashfs directly from the author, but to avoid bricking your router, you should first verify that you can mount the filesystem image with a kernel which has been patched with the squashfs code from Alchemy.
It should be noted that the tagging need not be this obvious and it is absolutely possible to create tags in a way which permits exact identification of the group of files which has been compared in order to eliminate the tag. Detagging could thus get all subscribers kicked who offer their downloaded firmware for comparison. You would be better off sacrificing one subscription per release. |
