mishaq
Premium
join:2004-01-24
Richardson, TX
clubs: | Or if the kid were smart
he/she could just remove the faceplate?
--
Damn you FCC! |
|
Rhobite
Premium
join:2002-02-24
Cambridge, MA
clubs:
1 edit | Looks like there are "security" screws on the faceplate. So the kid would have to take a dremel to a flathead screwdriver, which isn't too hard.
Edit: looked at the bigger picture, actually it looks like they're allen screws which are even easier. Come on at least they could have used torx (aka compaq) screws.
--
Jimmysquid.com - I take pictures. |
|
Mospaw
Head Ache
Hawaiian Jellyfish
join:2001-01-08
The Pacific
 ·Cox HSI
Host:
Road Warriors, Not..
All Things Macintosh
Automotive
| reply to mishaq
said by mishaq  :
he/she could just remove the faceplate?
First thing I thought.
Apparently they have never seen "child proof" medicine bottles. Either they have way under-described the physical security of this device, or any kid with an Allen wrench will be able to get into it and bypass it within about 3 minutes. |
|
BA
The Old Man's Gonna Roll the Hard Six
Premium,MVM
join:2001-05-24
Vancouver, BC
clubs: | reply to mishaq
Those screws look flat - they don't look like allen screws. You're going need at least a drill and good bits to get through that. |
|
Rhobite
Premium
join:2002-02-24
Cambridge, MA
clubs: | Look like allens to me: »www.smarthome.com/images/9620big.jpg |
|
delt4
17 years ... still waiting
Premium
join:2000-07-13
Pittsburgh, PA
·Comcast
| reply to Mospaw
said by Mospaw :
said by mishaq :
he/she could just remove the faceplate?
First thing I thought.
Apparently they have never seen "child proof" medicine bottles. Either they have way under-described the physical security of this device, or any kid with an Allen wrench will be able to get into it and bypass it within about 3 minutes.
And promptly get his ass beat for not listening. I agree with you Mospaw, it is easy to bypass it. |
|
Nerdtalker
Working Hard, Or Hardly Working?
Premium,MVM
join:2003-02-18
Tucson, AZ
clubs:
| reply to Mospaw
said by Mospaw :
said by mishaq :
he/she could just remove the faceplate?
First thing I thought.
Same here, I didn't even read the article fully, I just thought, well, that's dumb, all the kid needs is an allen wrench and some wire clippers, and boom, the thing comes off, you splice the cables together, and you've got it.  
They practically explain it on their website: »www.smarthome.com/9620.html
Kids are more resourceful than you think...
--
Touch a thistle timidly, and it pricks you; grasp it boldly, and its spines crumble. -William S. Halsey |
|
Techie2000
In Vertigo
Premium
join:2001-12-05
clubs:
| reply to BA
said by BA :
Those screws look flat - they don't look like allen screws. You're going need at least a drill and good bits to get through that.
Considering the product comes with an allen wrench, the allen screws part sounds logical to me.
--
"Compromise, not a dirty word." - Bono|Kerry/Edwards 2004 |
|
