jmirabil
join:2005-02-25
Simi Valley, CA
| reply to Chimmy3
Re: DI-624 Firmware update w/ Crash Recovery Step by S
"Talon, does your router have the creeping slowdown problem on static turbo?"
I may have this issue... quick summary: DI-624 router Rev C3, 2.50 usa FW being used with one dwl-g650 card, rev B5 (yes, B5) and newest "USA" B drivers. Using WPA-PSK and set to static 108 super G turbo at card and at AP/router.
The transfer rate is about 155k both directions, and there is huge web-page load latency. My old cisco 340 AP and Cisco 340 pcmcia card whips this combo...
Is this the creeping slowdown problem? What do I do?
-jonathan |
|
Talon88
The One
join:2003-08-13
Toronto
 ·Bell Sympatico
2 edits | reply to Talon88
::::
jmirabil,
Super-G is very sensitivity to interference of the
surrounding, & it will offen falling back to very slow
speed.
So, maybe you can try using "Super-G No Turbo"
I think you will see the better result .
::::
--
[=Talon88=]
»DI-624 Firmware update w/ Crash Recovery Step by S --
»[Info] Some Clue about DI-624 Reboot |
|
windie44
join:2004-12-24
Burbank, IL
| Talon I started router 3 days ago was fine for the first 2 days noticed on log a lot of ping of death attacks which the firewall stopped. Next day constant reboots every 5 min or so kept dropping out messenger. I changed to no turbo and channel 11 everything a go so far noticed that as i turned on each computer that it assigned lease in the log. I sent inquiry to Dlink no response yet. I think others may be on to something with the heat or and the cordless phones. Thanks for your help works for me so far. |
|
Talon88
The One
join:2003-08-13
Toronto
·Bell Sympatico
1 edit | :::
Glad to hear that my post help you.
I want to add maybe you can also Stand your
router instead of putting it flat....!
:::
said by windie44  :Talon, I changed to no turbo and channel 11 everything a go so far noticed that as i turned on each computer that it assigned lease in the log. I think others may be on to something with the heat or and the cordless phones. Thanks for your help works for me so far. --
[=Talon88=]
»DI-624 Firmware update w/ Crash Recovery Step by S --
»[Info] Some Clue about DI-624 Reboot |
|
windie44
join:2004-12-24
Burbank, IL
| Ok still good from yesterday no dropouts so far. Router still laying flat if it acts up again will stand up. Got response from Dlink. They advised to disable UPNP on the router and all the Machines. They say try this and if still having reboots downgrade firmware and do reset thing. For now will stay with the changes that you recommended they are working for me. Will let you know if I have to disable the UPNP as they have said to (try)Thanks again. Trying to post as complete as possible maybe others will do the same and lick this thing. Thanks again for your very good advise |
|
windie44
join:2004-12-24
Burbank, IL
| reply to Talon88
Ok still good from yesterday no dropouts so far. Router still laying flat if it acts up again will standup. Got response from dlink. They advised to diable UPNP on the router and all the Machines. They say try this and if still having reboots downgrade firmware and do reset thing. For now will stay with the changes that you reccommended they are working for me. Will let you know if I have to disable the UPNP as they have said to (try)Thanks again. Trying to post as complete as possible maybe others will do the same and lick this thing. Thanks again for your very good advise |
|
