gpontis
Premium
join:2003-10-22
Redwood City, CA
 ·SONIC.NET
|  A50 FW on 5200, no telnet or FTP !!!
I cannot log into the modem using telnet, and I also cannot connect via FTP. Telnet asks for login/password, but nothing that I know to put in is accepted. FTP rejects any login name that I have tried before it even gets to asking for a password.
I have tried entering new profiles and enabling everything. Also, I have tried the direct access with "http://192.168.254.254/pfwizardj.cgi?code=EDIT&id=prof1&retain=f".
Is it possible that telnet and FTP are not supported in this firmware ? (That would be dissappointing...) | |
|
 |
gpontis
Premium
join:2003-10-22
Redwood City, CA
·SONIC.NET
| If I am the first, then it gives me hope that these modes can be made to work on my box(es) too. One reason that I did not rush to try the FTP reset program is that I wasn't sure exactly what I would FTP over to the box even if I could. The A50 .def file appears to only have one login/pass of admin/admin. My understanding of ICGabe's utility is that the new password is only good long enough to connect through FTP once. | |
|
 | 
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs: | Re: A50 FW on 5200, no telnet or FTP !!! What IP did you use in the setup of the 3 profiles?
What are you trying to get from the FTP server?
Did you read the 2 long threads linked in the FAQ?
Regards,
Doctor Olds | |
|
buggage
Premium
join:2002-11-28
| Yes, the A50 does not come with Telnet/FTP acces. You can change this however, and create your own username and password.
Use ICGabe's utility to telnet into the modem.
Once in, type these commands:
cfg upro#1{usr{un=username
cfg upro#1{usr{pw=password
cfg upro#1{usr{per=0xFFFFFFFF
cfg save
do reboot
When the modem reboots, you will be able to telnet/FTP using the username and password you created. You won't need to use the FTP Tool again, unless you reset the modem. | |
|
gpontis
Premium
join:2003-10-22
Redwood City, CA | Ahhh, I forgot that the telnet login was the same as that for FTP. Works great after using ICGabe's util. Many thanks.
It should be mentioned that upro#1 is unrelated to user profile #1 that can be modified from the web GUI. | |
|
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| Re: A50 FW on 5200, no telnet or FTP !!! said by gpontis  :It should be mentioned that upro#1 is unrelated to user profile #1 that can be modified from the web GUI. Correct!! The three hidden profiles are numbered 0, 1, 2 (not 1, 2, 3).
Regards,
Doctor Olds | |
|
|
|
|
