BurnerX
join:2002-12-11
Whittier, CA | reply to NESTRAPEZ
Re: [Speed Problem] Anyone having issues? 90063
naw playa everything is fine here:D |
|
Matthew
Premium,VIP
join:2001-08-03
Emmett, ID
| reply to NESTRAPEZ
You should either call that in to 611 or report it at www.sbc.com. More than likely the two are related, but if the DSL side reports no synch And no dial tone the telco side requests you call 611 and deal with the voice issue first.
If you have a phone box with a test jack outside (commonly referred to around this site as a NID, but inside as an SNI), than you can take a phone to the test jack and see if you have no dial tone out at the test jack. If you have dial tone out there but not inside then the trouble is somewhere in the house. If you have no dial tone out there then the trouble is more than likely in the network.
When I was a Dial Tone tech, I saw on more than one occasion where the phone causing no dial tone was used to test outside. Led to some unhappy campers, but you do always want to test your test equipment when you get the chance or if it comes into question. 
--
It truly is the lowest level where we ALL make the difference. |
|
NESTRAPEZ
join:2000-10-01
Los Angeles, CA | reply to NESTRAPEZ
actually i just noticed I have no dial tone! |
|
Matthew
Premium,VIP
join:2001-08-03
Emmett, ID
| reply to NESTRAPEZ
said by NESTRAPEZ  :
Statistics
To Modem To Internet
Max Allowed Speed (kbps) 4832 608
SN Margin (dB) 5.0 -
Line Attenuation (dB) 39.5 -
Loss of Signal 0 -
Loss of Frame 0 0
CRC Errors 20 2
Looks like the synch rate, rate adapted down to 4832. Something has cut into the available bandwidth for your line. Any new phones around the house? How about new lights?
Any noticeable change in the voice quality of the line? Static, popping, crackling?
--
It truly is the lowest level where we ALL make the difference. |
|
scfarmer
join:2001-03-08
San Jose, CA | reply to d_l
What are you using to find out your stats?? |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV | reply to NESTRAPEZ
Your error counts are low, but they were just zeroed when you power cycled.
The noise margin is too low at 5.0 dB. Generally 6.0 dB is considered the minimum level. Has your noise margin been higher? |
|
NESTRAPEZ
join:2000-10-01
Los Angeles, CA
| reply to NESTRAPEZ
Statistics
To Modem To Internet
Max Allowed Speed (kbps) 4832 608
SN Margin (dB) 5.0 -
Line Attenuation (dB) 39.5 -
Loss of Signal 0 -
Loss of Frame 0 0
CRC Errors 20 2
--
I'm the sexiest man that ever played multiplayer games. |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV | reply to NESTRAPEZ
What are your other line stats like? Are you having high CRC error rates? |
|
NESTRAPEZ
join:2000-10-01
Los Angeles, CA | reply to NESTRAPEZ
power cycled. still not back to normal.
Connected at 4832 Kbps (downstream)
608 Kbps (upstream)
--
I'm the sexiest man that ever played multiplayer games. |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV | reply to NESTRAPEZ
Time to try a modem power cycle? |
|
NESTRAPEZ
join:2000-10-01
Los Angeles, CA
| I have the "Expert+ PKG" 6016/608.
Today I noticed my speeds were a little slower.
as of tonight my speed dropped to
4992 Kbps (downstream)
608 Kbps (upstream)
what's going on?
--
I'm the sexiest man that ever played multiplayer games. |
|
