Shootist
Premium
join:2003-02-10
Decatur, GA | reply to ravenink
Re: [Modem] Westell ProLine 6100 DSL Modem Router:
OK nitpick if you like. If you don't turn it off it is open. What other reason/need is there for a custom firmware.
--
Shooter Ready--Stand By BEEP ******** |
|
ravenink
join:2000-10-29
Atlanta, GA
| reply to Shootist
said by Shootist  : said by ravenink : said by Shootist :Not only that but it is reported that BS leaves some ports open or leaves a back door into the modem/router so they can get through to your PC if needed to troubleshoot. Reported by whom? I've yet to encounter anything like this. OK there are your reports. I'd consider a way for the helpdesk to gain access that has to be enabled from the customer's side something very different than an open port or a back door. Yes, the port is opened when the customer chooses to do so, but it sounds to me like it remains in the closed state the rest of the time. |
|
Shootist
Premium
join:2003-02-10
Decatur, GA
| reply to ravenink
said by ravenink : said by Shootist :Not only that but it is reported that BS leaves some ports open or leaves a back door into the modem/router so they can get through to your PC if needed to troubleshoot. Reported by whom? I've yet to encounter anything like this. OK there are your reports.
--
Shooter Ready--Stand By BEEP ******** |
|
ravenink
join:2000-10-29
Atlanta, GA
| reply to Shootist
said by Shootist :Not only that but it is reported that BS leaves some ports open or leaves a back door into the modem/router so they can get through to your PC if needed to troubleshoot. Reported by whom? I've yet to encounter anything like this. |
|
Shootist
Premium
join:2003-02-10
Decatur, GA | reply to jtudor
Not only that but it is reported that BS leaves some ports open or leaves a back door into the modem/router so they can get through to your PC if needed to troubleshoot.
--
Shooter Ready--Stand By BEEP ******** |
|
jtudor
Xm 60's On 6 Freak
Premium,MVM
join:2002-12-07
Morganton, NC
| reply to barton44
said by barton44 :But, what would be their reason for disabling this model? Would it make it more difficult to set up? My opinion is that Bellsouth disables features to make support easier. The less features a customer can make changes to, the easier it is for their Script readers to troubleshoot.
--
Best of luck
"Do, or Do not, there is no try!" Yoda
I will love my ANGEL until the end of time. She is my Princess.
|
|
barton44
join:2004-01-17
Macon, GA
| reply to jazzman916
I remember calling BellSouth tech support in 2000 and asking if I needed a firewall. I had read on the internet about them. They said no. So I immediately downloaded Zone Alarm. It's version 2.1.44 and I still use it on all of my computers. The newest version isn't as good (IMHO). Plus, with AVG, Spybot, AdAware and the Westell NAT I hope will be enough.
I guess Bellsouth now thinks that if no one ever installs a firewall, the NAT is better than nothing. But, what would be their reason for disabling this model? Would it make it more difficult to set up? |
|
jazzman916
Life on the Upbeat
Premium,Mod
join:2001-09-01
Birdland
clubs:
 ·surpasshosting
Host:
Virtual Private Ne..
Satellite Radio
AT&T Southeast
Wireless Security
| reply to barton44
said by barton44 :I have the BellSouth 610030-06 and have mine hooked to a switch. So you're saying it is a router but with no firewall protection? In this configuration the Westell is serving as a NAT which by NAT's very nature it will block unrequested inbound connection attempts. However, I'd still recommend a software solution on all connected PCs.
--
"The goal of Computer Science is to build something that will last at least until we've finished building it."- Anonymous |
|
