Birds
join:2004-10-23
| reply to ardenj
Re: How to use my Linksys wireless router with my 327w
Yes you can have it setup that way...
Just set it up as described in "Method 2" above, and then go in and disable the firewall on the 327W.
If the Linksys firewall is working correctly then a port scan test by should show that your connection is stealthed with the exception that an ICMP (Ping) was recieved. |
|
Birds
join:2004-10-23
| Sorry, missed that part that you wanted to have the Linksys do the authentication.
You might try setting the Versalink to VC mode to "Bridged" or "VLAN Bridged" instead of "Routed Bridged".
This is done through Configuration --> Advanced WAN --> WAN.
Choose the proper VC and then set the protocol under VC Configuration to "Bridged" and the protocol under "Bridged Settings" to "Bridged" or "VLAN Bridged" and not "Routed Bridged".
If that doesn't work you could try some of the other settings for the VC. |
|
